video corpo

Floover installation and maintenance instructions
29Pages

{{requestButtons}}

Catalog excerpts

Floover installation and maintenance instructions - 1

INSTALLATION & MAINTENANCE How to install, clean and maintain Floover

Open the catalog to page 1
Floover installation and maintenance instructions - 2

OUR COMPANY The history of Floover began to take shape in 2006 with the union of Andrea Prati and Joan Ferrer, friends and co-owners with extensive experience in the flooring business . Based on the needs and requests of their customers, they developed a new product, Floover, multilayer rigid flooring with designs based on high-end vinyl with the Unilin click system. Later, they developed other versions and incorporated waterproof unlimited designs with remarkable success. The aim of Floover is the continuous search for new and amazing products always based on the latest design and fashion,...

Open the catalog to page 2
Floover installation and maintenance instructions - 3

GLUE DOWN INSTALLATION & MAINTENANCE BEFORE INSTALLATION When gluing the LVT-adhesive tiles, care should be taken to bond to a clean, dry, even and tensile and pressure-resistant and crack-free surface. The laying is suitable for cement screeds, anhydrite / flow coating, hot asphalt / mastic asphalt screed and dry screed installation panels. Substrates s and/ or subfloors with adhesive residues must be sanded off and cleaned. The substrate must be primed with a suitable precoat concentrate, after drying with a more suitable leveling compound, a layer thickness of min. 2 mm to be...

Open the catalog to page 3
Floover installation and maintenance instructions - 4

INSTALLATION & MAINTENANCE BEFORE INSTALLATION Floover floors with HDF-Click (high-density wood fiberboard) is laid floating (i.e. not glued to the underground) on a clean, permanently dry, tensile and pressure-resistant as well as level and crack-free surface. The laying is suitable on ceramics and natural stone floors, on PVC, linoleum and plastic coverings, wooden planks and chipboard subfloors as well as all mineral screeds. The substrate must not contain substances which adversely affect the floor or cause interactions. Old floor sand carpets should be removed for hygiene reasons. The...

Open the catalog to page 4
Floover installation and maintenance instructions - 5

INSTALLATION & MAINTENANCE FOR SPLASH2O, SPLASH2O LIGHT & SPLASH2O DESIGN BEFORE INSTALLATION Floover SplasH2O is usually laid floating on a clean, permanently dry, tensile and pressure-resistant as well as level and crack-free surface. Alternatively, it can also be glued on the entire subfloor with a suitable LVT-adhesive. The laying is suitable on ceramics and natural stone floors, wooden planks and chipboard subfloors as well as all mineral screeds. Carpeting is recommended to remove for hygienic reasons. The substrate must not contain substances such as softener or solvents. The maximum...

Open the catalog to page 5
Floover installation and maintenance instructions - 6

GENERAL INSTRUCTIONS AH Fioover floorings can be used in conjunction with tow temperature underfloor heating, provided it is a heating system with heating components (hot water of electric), which are embedded in the floor. The underfloor heating must be installed in accordance with the supplier's instructions and according to the generally accepted norms and rules. The general installation instructions for Fioover flooring without underfloor heating also apply of course, unless explicitly mentioned betow. The flooring must be laid floating. It is recommended to tay an underlay with...

Open the catalog to page 6
Floover installation and maintenance instructions - 7

UNDERFLOOR HEATING CONCRETE OR SCREED AS SUB-FLOOR The type of screed and the installation method, combined with the underfloor heating, must comply with the instructions of the suppliers of the screed and the underfloor heating system. To obtain a homogeneous heat distribution across the entire floor, the distance between the heating elements must not be greater than 300 mm. The depth of the elements is determined by the fitter of the underfloor heating. The sub-floor must be sufficiently DRY across its complete thickness when installing the floor covering. This is maximum 1 .5% humidity...

Open the catalog to page 7
Floover installation and maintenance instructions - 8

STAIRS INSTALLATION 1. Before the installation, clean the surface and eliminate protuberances. 2. Cut the stairnose to the appropiate length of the step. If two sides or more, cut in 45º to make to sides. 3. Take the size and cut the piece of the surface of the step, using the click system if possible or just normal glue to joint the stairnose cut previously. 4. Install the step in place, and finally the vertical side of the step. 5. It is also possible to cover the side of the step with the same stairnose product. 6. Repeat this procedure step by step until your Floover stair is completed.

Open the catalog to page 8
Floover installation and maintenance instructions - 9

LVT MAINTENANCE GENERAL RECOMMENDATIONS Floover products have a high resistance against stains, abrasion, UV rays, and other factors, which makes the product suitable for a wide variety of uses, even in the outdoors. However, the durability of this flooring will depend also on a good installation, use and maintenance. We show you below some instructions to maintaining your Floover floor in a perfect condition. RECOMMENDATIONS FOR USE • In construction works, Floover flooring installation should be the last step to follow, by having the area clean and without any dust. • When you do later...

Open the catalog to page 9
Floover installation and maintenance instructions - 10

LVT MAINTENANCE STAINS CLEANING WITH FLOOVER STAIN REMOVER DESCRIPTION DU PRODUIT Natural crème soap, with creamy texture, neutral white colour. Supplied in 500gr tins which include an application sponge and a cleaning cloth. Does not contain allergenic products, solvents or chemical abrasives. 100% natural product. COMPOSITION 50% neutral soap. 30% natural enhancer (patented formula). 20% perfume Our kit includes tin, sponge, cloth and glovees Scrub and clean the area to be treated. Place a small amount of the stain removing soap onto the dampened sponge. Apply over the stain area. Rub it...

Open the catalog to page 10
Floover installation and maintenance instructions - 11

WOVEN ROLLS INSTALLATION PREPARATION Note the following requirements depending on the different surface material: 1. Concrete: Standard practice shall be followed. If the moisture condition of substrate is not reaching the standards, please treat the substrate with heavyduty epoxy-based moisture control system and wait until it is completely dry. 2. Wood: Standard practice shall be followed. Please do not install our flooring products directly over plywood, treated wood or other uneven or unstable wood substrates. Always make sure the surface is clean, completely dry, flat and free of...

Open the catalog to page 11

All FLOOVER catalogs and technical brochures

  1. FLOOVER mats

    5 Pages

  2. HDF

    12 Pages

  3. GLUE DOWN

    1 Pages

  4. Floover HDF

    11 Pages