Catalogs >
FLAKT WOODS >
WOODS STANDARD TEMPERATURE ROOF FANS

WOODS STANDARD TEMPERATURE ROOF FANS
1Pages

Catalog excerpts

WOODS STANDARD TEMPERATURE ROOF FANS - 1

Introduction The new HR and VR standard temperature roof fans for buildings, industries and • 50Hz and 60 Hz option available • High efficiency EC versions (for VR only) available suitable for open-loop and closed-loop control features • Protection guard and rain cowl included as standard Product details Product Code: RFCA _I The HR and VR roof fans can handle volume flow rates up to 5 m3/s and static pressure up to 1180Pa. The HR fans can discharge horizontally while the VRfans discharges vertically. The fan cowl is made of seawater resistant aluminum for fan sizes up to 500mm and from 560mm onwards they are made of galvanized sheet steel. The centrifugal impeller is made of polyamide material for fan sizes up to 560mm and above that they are made of aluminum. The roof fans can be connected with a range of accessories like manual shutters, swing-out frames, flat and sloping roof sockets, etc. This allows the fans to be fitted on either flat roofs or sloping roofs depending on the various applications they are suitable for. The HR and VR AC fans should be used with a speed controller to meet the demand ventilation needs. TheVR EC versions are equipped with high efficiency EC motors and can be controlled by a 0-10 V signal potentiometer. Fast Facts I • Volume flow rate up to 5 m3/s • Static pressure up to 1180 Pa • AC and ECversions available • Operating temperatures up to +70°C(depending on size) • Speed controllable

Open the catalog to page 1

WOODS STANDARD TEMPERATURE ROOF FANS 1Pages

Catalog excerpts

All FLAKT WOODS catalogs and technical brochures

WOODS STANDARD TEMPERATURE ROOF FANS
1Pages