Catalogs >
FLAKT WOODS >
Bifurcated Series 33 - Cased Axial Fans

Bifurcated Series 33 - Cased Axial Fans
4Pages

Catalog excerpts

Bifurcated Series 33 - Cased Axial Fans - 1

Axial Fans Catalogue (50Hz) Bifurcated Series 33 - Cased Axial Fans Features • • • • • 152 - 305 mm diameter Volume up to 3,420 m3/h (0.95 m3/s) Static pressures up to 380 Pa Suitable for temperatures up to 200°C Series 33 is cost effective solution to Bifurcated applications • Motor protection IP55 Electrical Supply • 220-240V/50Hz/1 f • 380-420V/50Hz/3 f Temperature Range • Suitable for temperatures between 100°C and 200°C (continuous operation) Product Code Cast in aluminium silicon alloy and with a fixed-pitch aerofoil section blade. This ensures strength, reliability and performance at high temperature. All motors are totally enclosed fan cooled, class F insulation with motor protection to IP55. All motors are supplied with sealed for life bearings. For higher temperatures please enquire. 15 - denotes the fan impeller diameter in centimetres JMBif - denotes Bifurcated Series 33 2900 - denotes speed Accessories Rubber anti-vibration mounts can be used, but only if the mounts are below the fan and the temperature at the anti-vibration mount is less that 80˚C. Fans are only suitable for use at 100ºC or above, which makes the product exempt from ErP legislation. Bifurcated fans are available long case only. Long casing covers impeller and motor and has duct mounted terminal box. The hot dipped galvanised casing gives a high resistance to corrosion. Motor is mounted inside a tunnel, so is ‘out of air stream’. Only for use at 100ºC or above, which makes it exempt from ErP legislation. If the temperature of airflow within a bifurcated fan system is above ambient, FWL recommend that the fan is allowed to overrun so that any excessive heat is removed from the system. Failure to do this could mean that heat will transfer via the shaft/casing to the motor tunnel, which could cause degradation of the grease and lead to premature failure. Flexible Connector Mounting Feet Fläkt Woods Limited (UK) Controls Inverter Specifications are subject of alteration without further notice

Open the catalog to page 1

Bifurcated Series 33 - Cased Axial Fans - 2

Axial Fans Catalogue [50Hz] Series 33 Performance and Electrical Data Product Speed Code rev/min Product Speed Code rev/min Product, Electrical and ErP Table Full Load Starting Wiring Controller Current Current Diagram Full Load Starting Wiring Controller Current Current Diagram If the temperature of airflow within a bifurcated fan system is above ambient, FWL recommend that the fan is allowed to overrun so that any excessive heat is removed from the system. Failure to do this could mean that excessive heat can transfer via the shaft/casing to the motor tunnel that can cause degradation of...

Open the catalog to page 2

Bifurcated Series 33 - Cased Axial Fans - 3

Axial Fans Catalogue [50Hz] Product Motor Code Range Specifications are subject of alteration without further notice

Open the catalog to page 3

Bifurcated Series 33 - Cased Axial Fans - 4

Axial Fans Catalogue [50Hz] Wiring Diagrams - Series 33 THREE PHASE DUAL VOLTAGE STAR CONNECTION INCOMING MOTOR LEADS BLOCK LETTERING. CIRCUITS WHEN FITTED: THERMAL PROTECTION THREE PHASE SUPPLY COUNTER CLOCKWISE: REVERSE (LI) AND (L2) SINGLE PHASE BLOCK CONNECTIONS BLOCK LETTERING REVERSE ROTATION SINGLE PHASE SUPPLY Flakt Woods Specifications are subject of alteration without further notice

Open the catalog to page 4

Bifurcated Series 33 - Cased Axial Fans 4Pages

Catalog excerpts

All FLAKT WOODS catalogs and technical brochures

Bifurcated Series 33 - Cased Axial Fans
4Pages