- Catalogs
- FİXA YAPI KİMYASALLARI SAN VE TİC LTD.ŞTİ
- Floor Systems & Curing Compounds 2023
Floor Systems & Curing Compounds 2023
Floor Systems & Curing Compounds 2023
FİXA Construction Chemicals, founded in 2001 in Istanbul, is a prominent player in the construction chemicals sector, focusing on high-tech products to improve modern building standards. The company prioritizes research and development, quality control, and customer service, with substantial production capabilities in Istanbul, Adana, and Ankara.
FİXA operates three factories with a total annual production capacity of 350,000 tons of powder and 5,000 tons of liquid chemicals. It also produces EPS for thermal insulation through its subsidiary, IGLOO Thermal Insulation Systems. The company holds several quality certifications, including ISO 9001:2015, and exports to over 30 countries.
FİXA offers a diverse range of products for the construction industry, divided into 11 categories: waterproofing systems, sealants, repair and reinforcement systems, floor systems, thermal insulation systems, concrete and mortar admixtures, mold release agents, curing compounds, cement-based plasters, tile adhesives, and technical adhesives.
The document outlines various floor systems, including cement-based and liquid surface hardeners, screeds, PVC adhesives, and epoxy and polyurethane floor coatings, each designed for specific applications with technical specifications provided.
FİXA offers curing compounds like KURFIX® 200, 300, and 400, which are acrylic and solvent-based products aimed at protecting and enhancing concrete surfaces.
Products are tested under standard conditions (23±2°C and 50%±5% relative humidity). Detailed application instructions and technical properties are provided to ensure optimal performance and durability.
1. Compressive Strength: ≥ 70 N/mm² at 28 days (TS EN 13892-2).
2. Flexural Strength: ≥ 10 N/mm² at 28 days (TS EN 13892-2).
3. Appearance: Available in red, green, and grey colored powder.
4. Application Temperature: Between +5°C and +35°C.
5. Aggregate Hardness: 7-9 Mohs Scale.
6. Resistance to Rolling Wheel: ≤ 1 cm³ (TS EN 13892-5).
MONOFIX® 80, 100, 200, 300: Abrasion-resistant powder surface hardeners with varying aggregates applied monolithically on fresh concrete surfaces to enhance wear, impact, dust, and abrasion resistance.
MONOFIX® LIQUID: A low viscosity, colorless liquid surface hardener that prevents dusting and abrasion, enhancing chemical and mechanical resistance.
MONOPRIMER®: An acrylic-based primer for absorbent surfaces to increase adherence and prevent dusting.
MONOFLOOR® 100 - C35, C25, C25E: Cement-based self-leveling floor screeds for surface leveling, suitable for indoor and dry environments.
Suitable for indoor and outdoor use in factories, business centers, garages, parking lots, loading areas, subway stations, parks, pedestrian ways, and more.
1. Increases abrasion resistance significantly compared to normal concrete.
2. Economical, long-lasting, and easy to apply.
3. Provides resistance to weather conditions, freeze-thaw cycles, and impacts.
4. Enhances surface impermeability and resistance to oils.
5. Available in various colors.
1. Light and moderate loads: 4-5 kg/m²; Heavy loads: 7-9 kg/m².
2. Packaged in 25 kg kraft bags, 30 kg plastic jerrycans, and 180 kg barrels.
1. Liquid Density: ~1.05-1.10 kg/L.
2. Drying Time: 45-60 minutes.
3. Service Temperature: -30°C to +80°C.
4. Water Mixing Ratio: 5.5-6 L water/25 kg powder.
5. Pot Life: 20-40 minutes.
6. Walk-on Time: 10-48 hours.
- Application Areas: Suitable for indoor use in residential buildings, hospitals, educational facilities, shopping malls, and more. It is used for leveling surfaces before laying various floor coverings.
- Advantages: Allows thick application, faster and easier application than cement mortars, no shrinkage cracks, walkable after 2 hours, economical, and suitable for floors with heating systems.
- Technical Properties: White fine powder, compressive strength ≥ 25 N/mm², flexural strength ≥ 7 N/mm², and application temperature between +5°C and +35°C.
- Application Areas: Similar to MAXIFLOOR®, used for leveling surfaces in various facilities.
- Advantages: High flexural and compressive strength, self-leveling, suitable for heating systems, and less carbon emission compared to cement screeds.
- Technical Properties: Compressive strength ≥ 25 N/mm², flexural strength ≥ 7 N/mm², and application thickness of 2 - 10 mm.
- Types: Includes Rapid 10, Flex 30, Tacky 25, and Eco 20, all acrylic-based and solvent-free.
- Application Areas: Used for bonding PVC and linoleum floor coverings in indoor and dry areas like residential buildings, hospitals, and shopping malls.
- Advantages: Solvent-free, easy to apply, fast drying, suitable for floor heating systems, and resistant to wheeled furniture.
- Technical Properties: Grey colored dispersion, density of 1.35 ± 0.05 kg/lt, and application temperature between +15°C and +30°C.
- Types: Includes REPOX® A and REPOX® AD, both solvent-free and epoxy resin-based.
- Application Areas: Used as primers under epoxy and polyurethane coatings in hygienic environments and industrial settings.
- Advantages: High mechanical strength, resistant to chemicals, and functions as a bonding bridge for coatings.
- Technical Properties: Compressive strength of 68 - 75 N/mm², bond strength > 2 N/mm², and application temperature between +10°C and +30°C.
- REPOX AE: A solvent-free epoxy impregnation surface primer suitable for indoor and outdoor use, particularly in environments with surface moisture up to 6%. It serves as a bonding bridge for epoxy and polyurethane coatings.
- REPOX AH: A moisture-tolerant epoxy primer that adheres well to moist cement surfaces, providing a bonding bridge for subsequent coatings.
- REPOX CAP: A ceramic bonding primer that functions as a bonding bridge for epoxy and polyurethane coatings on ceramic surfaces.
- REPOX AC: A colored epoxy primer and mid-coat that provides a decorative look and strengthens the surface when mixed with aggregate.
- REPOX 510: A self-leveling epoxy floor coating with high chemical resistance, suitable for hygienic environments and areas with heavy traffic.
- REPOX 520: A textured epoxy floor coating designed for anti-slip applications in areas exposed to heavy vehicle and pedestrian traffic.
1. REPOX® 550 Epoxy Paint and Coating:
- Components: Epoxy resin and hardener.
- Mixture Ratio: A: 15 kg, B: 10 kg.
- Application Temperature: +10°C to +30°C.
- Pot Life: 50-60 minutes.
- Complete Curing Time: 7 days.
- Advantages: Solvent-free, high chemical and mechanical resistance, hygienic.
- Application Areas: Indoor, concrete and metal surfaces, hygienic places, food industries.
2. REPOX® 560WB Waterborne Epoxy Paint and Coating:
- Components: Polyurethane resin and hardener.
- Mixture Ratio: A: 20 kg, B: 5 kg.
- Application Temperature: +10°C to +30°C.
- Pot Life: 30-40 minutes.
- Complete Curing Time: 7 days.
- Advantages: Waterborne, odorless, high mechanical resistance.
- Application Areas: Indoor, hygienic places, food industries, shopping malls.
3. POLAN® 590 Polyurethane Flexible Self-Levelling Coating:
- Components: Polyurethane resin and hardener.
- Mixture Ratio: A: 20 kg, B: 5 kg.
- Application Temperature: +10°C to +30°C.
- Pot Life: 30-40 minutes.
- Complete Curing Time: 7 days.
- Advantages: Solvent-free, flexible, high mechanical resistance.
- Application Areas: Indoor and outdoor, heavy traffic areas, hygienic places.
4. POLAN® AF Polyurethane Aliphatic Top Coat Paint (UV Resistant):
- Components: Polyurethane resin and hardener.
- Mixture Ratio: A: 16 kg, B: 4 kg.
- Application Temperature: +10°C to +30°C.
- Pot Life: 4-6 hours.
- Complete Curing Time: 7 days.
- Advantages: UV resistant, glossy, high color stability.
- Application Areas: Indoor and outdoor, concrete, steel, and wooden surfaces.
5. POLAN® AFM Polyurethane Aliphatic Top Coat Paint Semi-Matte Finish (UV Resistant):
- Components: Polyurethane resin and hardener.
- Mixture Ratio: A: 20 kg, B: 4 kg.
- Application Temperature: +10°C to +30°C.
- Pot Life: 4-6 hours.
- Complete Curing Time: 7 days.
- Advantages: UV resistant, semi-matte, high color stability.
- Application Areas: Indoor and outdoor, sports fields, vehicle surfaces.
6. DUROPAINT® Floor Paint:
- Description: Chlorine-rubber resin based, thixotropic.
- Application Areas: Indoor and outdoor, marking parking garages, pedestrian ways.
- Advantages: Economical, fast drying, high abrasion resistance.
7. FIXA® Polyethylene Backer Rod:
- Description: Closed cell structured, polyethylene based.
- Application Areas: Joint depth adjustment, supporting filler chemicals.
- Advantages: Cost-effective, flexible, air and water impermeable.
8. POLIMIX Polypropylene Fiber:
- Description: Polypropylene based fiber for concrete and mortars.
- Application Areas: Industrial floors, water tanks, precast elements.
- Advantages: Resistant to water and alkaline, prevents cracks, increases fire resistance.
- Production Method: Cold drawing method.
- Application Areas: Suitable for all types of open and closed field floor concrete, prefabricated elements, concrete pipes, shotcrete applications, and anti-seismic structures.
- Advantages: Offers high impact resistance, increases flexural strength by 50-70%, provides resistance against shrinkage, dynamic loads, and fatigue, prevents crack formation, and is economical.
- Consumption: Usage varies from 10-45 kg per cubic meter of concrete.
- Packaging: Available in 25 kg packages.
- KURFIX® 200: An acrylic-based, waterborne curing compound that prevents quick water loss from concrete. It is effective in preventing shrinkage cracks and is safe for indoor use. Consumption is 200-300 g/m2.
- KURFIX® 300: A solvent-based curing compound that forms a protective film to reduce shrinkage cracks. It is more effective than paraffin and acrylic-based compounds. Consumption is 150-180 g/m2.
- KURFIX® 400: A solvent-based curing compound and surface protector that prevents water loss and reduces surface abrasion. It is compatible with cement, epoxy, and polyurethane coatings. Consumption is 170-250 g/m2.
- KURFIX® 200: White colored liquid, drying time of 2 hours, not flammable.
- KURFIX® 300: Transparent amber yellow liquid, drying time of 40 minutes, flash point of +80°C.
- KURFIX® 400: Transparent yellow liquid, drying time of 2-4 hours, flash point of +80°C.
Catalog excerpts
Floor Systems & Curing Compounds
Open the catalog to page 1
In today’s world, modern buildings are meeting not only the housing needs of people but also respond to their aesthetics, comfort and safety needs. Technologically advanced buildings raise the living standards of their residents and ensure that they live a happy life. Construction chemicals play a key role in this comfort. FİXA CONSTRUCTION CHEMICALS was founded in 2001 in Istanbul with the belief that advanced technology buildings can only be constructed with high technology chemicals. FİXA is one of the leading companies in its industry with its investment in research and development. Today,...
Open the catalog to page 3
OUR FACILITIES CONSTRUCTION CHEMICALS ‹stanbul Factory Total Area Closed Area Production Capacity 150,000 ton/year (powder product) 5,000 ton/year (liquid product) 5,000 ton/year (MS-silicone sealant) Adana Factory Total Area Closed Area Production Capacity 80,000 ton/year (powder product) Ankara Factory Total Area Closed Area Production Capacity 120,000 ton/year (powder product) Total Area Closed Area Production Capacity
Open the catalog to page 4
INDEX Page FLOOR SYSTEMS CURING COMPOUNDS
Open the catalog to page 6
Products (Alphabetical Order) Page
Open the catalog to page 7
Application instructions and technical data provided for the products are obtained in line with our experience and the tests are implemented according to international standards, under ambient temperatures of 23±2°C and ambient relative humidity conditions of 50%±5%. Higher temperatures decrease while lower temperatures increase these durations.
Open the catalog to page 8
FLOOR SYSTEMS
Open the catalog to page 9
Basalt Aggregated Surface Hardener Quartz Aggregated Surface Hardener Description: Abrasion resistant powder surface hardener consisting of a mixture of special type cement, basalt aggregate and performance-enhancing chemical additives, applied monolithically on fresh concrete surfaces. It provides wear, impact, dust and abrasion resistance against light and medium loads on concrete surfaces. Description: Abrasion resistant powder surface hardener consisting of a mixture of special type cement, high quality quartz aggregate and performance-enhancing chemical additives, applied monolithically...
Open the catalog to page 10
MONOFIX LIQUID Description: Abrasion resistant powder surface hardener consisting of a mixture of special type cement, high quality corundum aggregate and performance-enhancing chemical additives, applied monolithically on fresh concrete surfaces. It provides wear, impact, dust and abrasion resistance against light, medium and heavy loads on concrete surfaces. Description: Low viscosity, colorless liquid surface hardener that protects the surface from dusting and abrasion. Increases the resistance of the surface against water. Enhances chemical and mechanical resistance. Description: Acrylic...
Open the catalog to page 11
Description: C35 class, cement based self-levelling floor screed which can be applied up to 10 mm thickness, to eliminate defects and roughnesses on the surface. Description: C25 class, cement based self-levelling floor screed which can be applied up to 10 mm thickness, to eliminate defects and roughnesses on the surface. Description: C25 class, cement based self-levelling floor screed which can be applied up to 10 mm thickness, to eliminate defects and roughnesses on the surface. Application Areas: • Indoor and dry environments, • Residential buildings, • Hospitals, • Education facilities, • Shopping...
Open the catalog to page 12
Description: Gypsum (calcium sulphate) based floor mortar that dries quickly and allows thick application (2 - 10 cm), used for the purpose of eliminating and correcting surface defects on slab concrete. Description: Gypsum (calcium sulphate) based self-levelling floor mortar applied 2 - 10 mm, used for the purpose of eliminating and correcting surface defects on slab concrete. Description: Acrylic based, solvent-free, single component, multipurpose dispersion floor covering adhesive for bonding PVC and linoleum floor coverings to pre-leveled surfaces. Adheres fast and strongly. Gypsum Based Ready-Mixed...
Open the catalog to page 13
Description: Acrylic based, solvent-free, single component, flexible dispersion floor covering adhesive for bonding PVC and linoleum floor coverings to pre-leveled surfaces. Description: Acrylic based, solvent-free, single component, flexible dispersion floor covering adhesive with improved stickiness for bonding PVC and linoleum floor coverings to pre-leveled surfaces. Offers long workability. Description: Acrylic based, solvent-free, single component, dispersion floor covering adhesive for bonding PVC and linoleum floor coverings to pre-leveled surfaces. Acrylic Based Flexible PVC Floor Covering Adhesive...
Open the catalog to page 14
Description: Epoxy resin based; solvent free, double component, epoxy floor primer with low quantity of filler for concrete and cement based mineral surfaces. Can be used as primer under epoxy and polyurethane based floor coatings. Description: Epoxy resin based; solvent free, double component, low viscosity epoxy impregnation surface primer and penetration material. Can be used as primer under epoxy and polyurethane based floor coatings and paints for impregnation or can be used alone to prevent the dusting of the concrete. Solvent-Free Epoxy Surface Primer Description: Epoxy resin based; solvent...
Open the catalog to page 15
Description: Epoxy resin based, solvent free, double component, low viscosity, moisture tolerant epoxy primer, penetration and impregnation material for concrete and cement based mineral surfaces. Description: Epoxy resin based, solvent free, double component, nonabsorbent ceramic bonding primer which contains silica sand. Used on ceramics and functions as a bonding bridge for epoxy and polyurethane coatings and paints which will be applied on it. Solvent-Free Moisture Tolerant Epoxy Surface Primer Application Areas: • Indoor and outdoor, • Places where the surface moisture is maximum 6%, • As...
Open the catalog to page 16
Description: Epoxy resin based, double component, waterborne surface primer for concrete and cement based mineral surfaces. Description: Epoxy resin based, double component, self-levelling, solvent free floor coating material with high chemical resistance and mechanical strength and finishes in a flat surface. Description: Epoxy resin based, double component, solvent-free, thixotropic floor coating material with an orange peel appearance (textured). Waterborne Epoxy Surface Primer Application Areas: • Indoor, • As a primer under the coatings in hygienic environments such as hospitals (especially...
Open the catalog to page 17All FİXA YAPI KİMYASALLARI SAN VE TİC LTD.ŞTİ catalogs and technical brochures
PRODUCT BROCHURE 202228 Pages
PRODUCT CATALOGUE 2022102 Pages
