Water Block Seal (S-20)
1Pages

{{requestButtons}}

Catalog excerpts

Water Block Seal (S-20) - 1

Water Block Seal (S-20) 1. Description Firestone Water Block Seal is designed to provide a watertight seal when used in compression as specified in drains, scuppers, wall terminations and other system details. Preparation Surfaces on which Water Block Seal is to be applied must be clean, dry and free from loose parts of concrete, stone, mortar, foreign materials, and other contaminants. Restore to room temperature prior to use, if exposed to lower temperatures (< 15ºC) for a prolonged period. Application The Sealant is applied with a mastic gun at the specified location and put under a continuous compression. Coverage 3 lm per tube or 2 drains per tube. Thinning is not allowed. Characteristics Technical Base Colour Solvents Solids Viscosity (26ºC) (cp) Specific gravity Flash point (º C) Butyl rubber Grey Heptane 86% 1.600.000 +/- 300.000 1.31 -10 Packaging / Storage / Shelf Life Precautions Flammable. Keep away from sources of ignition. Do not smoke when using. For professional use only. Use only in well ventilated areas. Avoid contact with skin and eyes. Refer to Material Safety Data Sheets. Keep out of the reach of children. Recommended cleaners are mineral spirits, naphtha or kerosene. 4 • 31 EPDM Product Data Sheets 4. Product Data Sheets Packaging: 25 tubes/carton. Storage: Dry and clean. Store in original unopened containers at temperatures between 15°C and 25°C. Keep the material out of direct sunlight until ready for application. Shelf Life: 12 months, when stored in above-mentioned conditions. Shelf life will be reduced if exposed to higher temperatu

Open the catalog to page 1

All Holcim Elevate catalogs and technical brochures