UltraPly TPO Unsupported Flashing
1Pages

{{requestButtons}}

Catalog excerpts

UltraPly TPO Unsupported Flashing - 1

UltraPly™ TPO Unsupported Flashing Firestone Item Number: W56TPO3017 (white) W56TPOG017 (gray) Firestone UltraPly TPO Flashing is a non-reinforced thermoplastic polyolefin membrane designed to be used in roofing applications where Firestone pre-formed TPO accessory products are not appropriate. 2. Preparation Substrates must be clean, dry, smooth, free of sharp edges, fins, loose or foreign materials, oil, grease, and other materials which may damage the membrane. All rough surfaces which could damage the membrane shall be repaired prior to installing the membrane, as specified. All surface voids greater than 6 mm wide shall be properly filled with an acceptable fill material. Install the Firestone UltraPly TPO Unsupported Flashing material with the appropriate heat welding equipment in accordance with current Firestone UltraPly TPO specifications, details and workmanship requirements. The dimensions of the Unsupported Flashing depend on the detail to be flashed. Refer to the Firestone specifications and details for specific information. Test Method Declared Value Membrane Thickness Tensile Strength Tearing Strength 4. Product Data Sheets Properties after Heat Aging (166 hours at 115°C) Tensile Strength Tearing Strength Packaging / Storage / Shelf Life Packaging: 0.61 m x 15.25 m roll. Storage: Store material in its original unopened packaging away from sources of physical damage or chemical contamination. Shelf life: Unlimited. 7. Precautions Exercise caution when lifting, moving, transporting, storing or handling membrane rolls to avoid sources of punctures and possible physical damage. Contact Firestone Technical Department for specific recommendations regarding chemical or waste product compatibility with Firestone UltraPly TPO Membrane. 4•5 TPO Product Data Sheets

Open the catalog to page 1

All Holcim Elevate catalogs and technical brochures