QuickSeam™ SA Flashing
2Pages

{{requestButtons}}

Catalog excerpts

QuickSeam™ SA Flashing - 1

Technical Information Sheet QuickSeam™ SA Flashing A 1. Description Firestone QuickSeam™ SA Flashing is a 457 mm (18”) wide, 1.52 mm thick non-reinforced RubberGard™ EPDM membrane, fully laminated to Firestone ™ QuickSeam Tape. It has a polyester release liner for easy removal and excellent olyester weather resistance. QuickSeam SA Flashing is a l labor saving and environmentally friendly alternative to conventional methods that utilize c contact adhesive for attachment. The SA Flashing can be used to easily flash details where cured EPDM g is required or preferred: curbs, parapets gutters, general roof repairs, drain and parapets, pipe flanges. 2. Preparation The RubberGard™ EPDM surfaces and/or mating surfaces must be prepared with QuickPrime Plus, using a QuickPrime™ QuickScrubber™ or QuickScrubber™ Plus tool. Use of other products is not allowed. Restore the product to ™ room temperature prior to use if exposed to temperatures below 15°C for prolonged periods. 3. Application Refer to the Firestone specifications for specific installation instructions. ions 4. Coverage In accordance with length of detail to be covered. Adjoining strips require an overlap of 25 mm and a QuickSeam FormFlash cover patch. 5. Characteristics Physical • Superior ozone and UV resistance. • Remains flexible over wide temperature variations. • Application temperature range is between -20°C and 50°C. • Outstanding adhesion to approved substrates for maximum performance. Technical EPDM Flashing QuickSeam Tape EPDM Rubber polymers • Base Black Black • Color None None • Solvents 100% 100% • Solids Cured Cured • State 1.52 mm 0.51 mm • Thickness 457 mm 457 mm • Width Packaging Part number 15.25 m (50’) rolls, 1 roll per carton W56RAC1620 1620 Note: QuickScrubber and/or QuickScrubber Plus pads and handles are included in each carton. Quantities vary depending on the QuickSeam product. Storage: Store in original unopened containers at temperatures between 15°C and 25°C. Keep the material out of direct sunlight until ready for application. Firestone Building Products Europe I Ikaroslaan 75 I 1930 Zaventem I Belgium T. +32 (0)2 711 44 50 I F. +32 (0)2 721 27 18 I info@fb @fbpe.be I www.firestonebpe.com

Open the catalog to page 1
QuickSeam™ SA Flashing - 2

Technical Information Sheet Shelf life: 12 months can be expected if stored in above mentioned conditions. Shelf life information is only above-mentioned a recommendation and not a fact of life. The real expiration date highly depends on the history of storage and handling of the accessories. Quality and applicability should thus always be verified: the QuickSeam SA cessories. Flashing Strip can be used only as long as the release liner can easily be removed from the tape. Firestone Building Products Europe I Ikaroslaan 75 I 1930 Zaventem I Belgium T. +32 (0)2 711 44 50 I F. +32 (0)2 721 27...

Open the catalog to page 2

All Holcim Elevate catalogs and technical brochures