- Catalogs
- Firebelly Stoves
- Firebelly T1
Firebelly T1
1 / 9 PagesView full catalog
Firebelly T1
Product catalog summary
Important Points
- Installation should be performed by a HETAS registered installer.
- Compliance with local, national, and European standards is required.
- The appliance surface becomes hot; use a fireguard if necessary.
- Only burn wood; do not use as an incinerator or with liquid fuels.
- Annual maintenance and chimney sweeping are recommended.
Lighting the Appliance
- Open air controls fully before lighting.
- Use firelighters or paper with dry kindling to start the fire.
- Leave the door slightly open initially to prevent condensation.
- Add larger wood pieces once the fire is established.
Running the Appliance
- Adjust air controls to manage burn rate; avoid closing the top air control fully.
- Re-fuel frequently with small amounts of wood.
- Close the door except during ignition, refueling, and residue removal.
Burning Tips and Hints
- Use well-seasoned wood with less than 20% moisture content.
- Store wood for 12 months in a dry, ventilated space.
- Ensure the chimney/flue provides a positive updraft.
Maintenance & Cleaning
- Clean only when the stove is cold using a soft brush or vacuum.
- Chimney/flue should be swept at least once a year.
- Use only recommended original parts for replacements.
Technical Specification
- Model: Firebelly T1
- Weight: 60 kgs
- Nominal Heat Output: 4.8 kW
- CO Emission: 0.68
- Flue Gas Temperature: 203°C
Installation
- Must comply with current building regulations.
- Flue must be at least 4.5 meters high and have a 125mm diameter.
- Non-combustible hearth required with specific dimensions.
Commissioning
- Ensure all insulation is in place and check door seals.
- Perform a smoke test to ensure proper flue function.
- Explain operation and maintenance to the user.
See more
All Firebelly Stoves catalogs and technical brochures
Brochure20 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.