FB2
1 / 8 PagesView full catalog
FB2
Product catalog summary
Operating Instructions
- Lighting the Stove: Gradually introduce heat to adapt materials, ensure all components are in place, and remove packaging. Use the supplied tool for air control adjustments.
- Wood Burning Tips: Maintain small, hot fires for efficiency, avoid overstacking fuel, and adjust air controls gradually.
- Running Temperature: Maintain flue gas temperatures between 150°C and 300°C using a thermometer for optimal performance.
- Cleaning and Maintenance: Regularly clean the glass, check for soot build-up, and sweep the chimney annually or more frequently if used regularly.
- Building Regulations: Comply with local and European standards and consult a chimney sweep for suitability checks.
- Ventilation: Ensure adequate air supply, especially for stoves with outputs over 5kW.
- Hearth and Clearances: Install on a non-combustible hearth with specified clearances to combustible materials.
- Chimney Requirements: Inspect and sweep the chimney before installation, ensuring it serves only the stove.
- Model: FB2
- Weight: 95KG
- Nominal Heat Output: 12KW
Chimney and Flue Pipe Recommendations: Fit chimneys with a strong updraft and use a flue pipe damper or draft stabilizer to regulate chimney draught. Ensure the damper does not close the pipe completely, leaving at least 20% open.
Flue Connection: The stove offers rear and top flue connections. Cover the unused outlet with a flue blanking plate and secure it with a clamp. Seal flue connections with fire cement or a high-temperature rope seal. A typical installation requires a register plate and a 6” flue pipe.
Operational Problems:
- Blackened Glass: Caused by damp wood, insufficient air intake, or low stove temperature. Use wood with less than 20% moisture and ensure adequate air intake.
- Smoke in Room: Avoid opening the door with high flames, check chimney performance, and ensure any flue damper or stabilizer is open.
- Uncontrollable Combustion: Check for damaged door seals and consider fitting a draft stabilizer if chimney draft is excessive.
Warranty: The stove comes with a two-year guarantee for defects due to faulty workmanship during normal use, excluding replaceable parts such as glass, door rope seals, and fire brick linings.
See more
All Firebelly Stoves catalogs and technical brochures
Brochure20 Pages
Archived catalogs
FB18 Pages
Firebelly T19 Pages
FB8 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.