RELAYING INNOVATION SELECTION GUIDE

ABOUT US Finder was founded in Italy in 1954. Since then it has been designing and manufacturing a wide range of electromechanical and electronic components for both the residential and industrial sectors. Today, thanks to its global vision, Finder now distributes its products around the world through a network of 29 company-owned subsidiaries and more than 80 trade partnerships. Finder is an international family made up of more than 2000 individuals, all united by the same values and passion for our products. 14,000+ different products to satisfy a myriad of applications. From products at the...

Type 78.2K.1.230.3000 SWITCH MODE POWER SUPPLY Type 19.6K.9.030.4300 6 CHANNEL SWITCHING ACTUATOR 16 A OUTPUTS Type 19.3K.9.030.4300 3 CHANNEL SWITCHING ACTUATOR

THE FINDER SOLUTION Bringing our reliability to building automation PIR movement and presence detector Type 18.5K.9.030.0001 PIR movement detector for corridors Type 18.4K.9.030.0001 Universal Interface Type 1K.02.9030 – 2 input Type 1K.04.9030 – 4 input Power Supply output 30 V DC 640 mA Type 78.2K.1.230.3000 Universal 2 channel dimmer Type 15.2K.8.230.0400 6 Channel Switching Actuator 16 A for lighting applications Type 19.6K.9.030.4300 3 Channel Roller shutter and blind actuator Type 19.3K.9.030.4300 An open standard conforming to European and International regulations for facilitating the...

Compact and powerful in a width of just four modules. 35 mm rail (EN 60715) mount 72 mm wide (4 modules) - Two power supplies can be installed 15 meters apart - 3 LED status indicator: - Green: correct voltage - Yellow: over-voltage - Thermal protection against overloads and short circuit protection

PIR MOVEMENT AND PRESENCE DETECTOR Type 18.5K.9.030.0001 Movement and presence detection, suitable for applications in offices, classrooms, zones of low activity Supply voltage via KNX Bus Surface or recessed ceiling mounting - Sensing area up to 64m2: 8x8 m movement, 4x4 m presence - Detection height from 3 - 5 meters - Dynamic light regulation - Up to 5 outputs - LUX and occupancy status cyclic sending - Master / Slave connection to extend the detection area - Logic gates - Light level and motion status - Nominal consumption 10 mA User manual Lighting control for offices, classrooms, bathrooms...

Movement detection for corridors, supermarket or warehouse aisles, communal areas in hotels, offices etc. Supply voltage via KNX Bus Surface or recessed ceiling mounting - Sensing area 30 meters length and 4 meters width - Two detection areas: right and left - Dynamic light regulation - LUX and occupancy status cyclic sending - Master / Slave connection to extend the detection area - Logic gates - Light level and motion status SENSING AREA

6 x 16 A relay outputs. AgSnO2 contacts ensure durability and versatility of use. 35 mm rail (EN 60715) mount 72 mm wide (4 modules) - Bistable relay ENEC approved (Maximum peak current up to 120 A) - 6 output contacts rated 16 A 250 V AC, individually configurable NO or NC - Nominal lamp rating: - 230 V halogen: 2000 W - single phase motor load: 0.5 kW - LED status indicator per output - Time functions (ON, OFF, Blink, Staircase) - Independent logic functions for each output (AND, OR, XOR, THRESHOLD, WINDOW) - Scenario Management - Volt-free output contacts (clean contacts) Ideal for interfacing...

3 channel switching actuator for use with electric / electronic motors. For the management of curtains, shutters and blinds. £? 35 mm rail (EN 60715) mount 72 mm wide (4 modules) - Bistable relay ENEC approved (Maximum peak current up to 120 A) - Controls up to 3 electric motors - Logic outputs - Logically interlocked outputs

UNIVERSAL 2 CHANNEL DIMMER Type 15.2K.8.230.0400 Suitable for strip LED 230 V AC, LED dimmable lamps, halogen lamps, CFL dimmable lamps, electromagnetic and electronic transformers. 35 mm rail (EN 60715) mount 72 mm wide (4 modules) - Leading and Trailing edge dimming metods selectable via ETS - Manual control of each channel via front panel - Thermal and short-circuit protection - 2 output 400 W 230 V AC - Nominal lamp rating: - halogen: 400 W - LED: 100 W - electronic transformer: 100 W - LED strip 230 V: 360 W - LED status indicator for each output - Scenario Management - Nominal consumption...

Compact size (34 x 34 x 11 mm), suitable for recessed installation - 2 or 4 inputs, 2 or 4 output LEDs - All outputs can drive low voltage LEDs for showing operational status on traditional illuminated pushbuttons or on mimic display panels - Up to 8 advanced logic functions Mounting on 35 mm rail (EN 60715), width 17.5 mm (1 module) - Interfacing of the KNX bus system to a PC equipped with USB port - Enable KNX standard backbones - Compatible with ETS 3 (or higher)

RELAYING INNOVATION ©finder FINDER S.p.A. sole proprietorship Via Drubiaglio, 14 - 10040 ALMESE (TO) ITALY tel +39 011 9346211 - [email protected] Prices, features, specifications, capabilities, appearance and availability of our products and services are subject to change without notice. ZGUENXXKNXX - X/2024 - Products KNX FINDER assumes no responsibility for the presence of possible errors or insufficient information in this document. In case of discrepancies between the printed and online versions, the latter prevails.