RELAYING INNOVATION INDUSTRIAL APPLICATIONS RESIDENTIAL AND COMMERCIAL

Overview Series Industrial and PCB relays (EMR/SSR) Industrial contactors Relay interface modules (EMR/SSR) Interface modules Relays with forcibly guided contacts Power solid state relays (SSR) Monitoring relays Power analyzer products Energy meters Surge Protection Devices (SPD) Switch mode power supplies Panel thermostats Filter fans Panel heaters LED panel light Power outlets for electrical enclosures Distributions block OPTA - Programmable Logic Relays (PLRs) Modular and plug-in timers Light dependent relays Time switches Electronic staircase timers Dimmers Movement detector LUMOS - LED recessed...

Electronic circuit boards Hi-Fi systems Door and gate openers

Finder reserves the right to make changes to its products and their technical specifications at any time and without prior notice, as part of its policy of continuous improvement. The information contained in this document is provided for indicative purposes only and does not constitute a contractual obligation; errors and omissions excepted. In the event of any discrepancy between the printed and online versions, the latter, available at findernet.com, shall prevail.

Printed circuit mount 2 A signal relay • 2 Pole changeover contacts Low level switching capability • Subminiature - industry standard DIL package • Cadmium Free contact material For outline drawing see page 5 Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/ Maximum switching voltage V AC Single phase motor rating (230 V AC) kW Minimum switching load mW (V/mA) Standard contact material Coil specification Rated power AC/DC VA (50 Hz)/W 30.22 Low coil power Au clad contacts PCB mount Holding voltage AC/DC Must drop-out voltage AC/DC Technical data Mechanical...

30 SERIESSubminiature DIL relays 2 A Ordering information Technical data Insulation according to EN 61810-1

30 SERIES Subminiature DIL relays 2 A Contact specification F 30 - Electrical life (AC1) v contact current (125 V) Note: The rated current of 2 A corresponds to the limiting continuous current. Coil specifications DC coil data - 0.2 W sensitive Nominal voltage Coil code R 30 - DC coil operating range v ambient temperature Operating range Rated coil consumption 4.8 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. Outline drawing Please see general technical information

Subminiature PCB relays 6 A Copiers Hi-Fi systems Washing machines Control systems Electronic kits Electronic circuit boards Programmable controllers

Finder reserves the right to make changes to its products and their technical specifications at any time and without prior notice, as part of its policy of continuous improvement. The information contained in this document is provided for indicative purposes only and does not constitute a contractual obligation; errors and omissions excepted. In the event of any discrepancy between the printed and online versions, the latter, available at findernet.com, shall prevail.

Printed circuit mount 6 A relay 32.21-400032.21-4300 • 1 Pole changeover contacts or 1 Pole normally open contact • Subminiature, low profile package • Cadmium Free contacts 1 CO (SPDT), 6 A Low coil power PCB mount For outline drawing see page 5

32 SERIES Subminiature PCB relays 6 A Ordering information Example: 32 series PCB, 1 NO (SPDT-NO) - 6 A contacts, 24 V sensitive DC coil. A Series Type 2 = PCB mount No. of poles 1 = 1 pole, 6 A A: Contact material 4 = Standard AgSnO2 D: Special versions 0 = Wash tight (RT III) B: Contact circuit 0 = CO (SPDT) 3 = NO (SPST) Coil version 7 = Sensitive DC Coil voltage See coil specifications Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. Type Coil version Technical data Insulation according to EN 61810-1...

32 SERIES Subminiature PCB relays 6 A Contact specification F 32 - Electrical life (AC) v contact current H 32 - Maximum DC1 breaking capacity Resistive load - cosφ = 1 Inductive load - cosφ = 0.4 • When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 50 · 103 can be expected. • In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. Coil specifications DC coil data - 0.2 W sensitive Nominal voltage Coil...

Ultra-slim PCB Relays (EMR or SSR) 0.1 - 0.2 - 2 - 6 A Bottling plant Packaging machines Labelling machines Road / tunnel lighting Burners, boilers and furnaces Timers and lighting controls Electronic circuit boards Programmable controllers

Finder reserves the right to make changes to its products and their technical specifications at any time and without prior notice, as part of its policy of continuous improvement. The information contained in this document is provided for indicative purposes only and does not constitute a contractual obligation; errors and omissions excepted. In the event of any discrepancy between the printed and online versions, the latter, available at findernet.com, shall prevail.

34 SERIES Ultra-Slim electromechanical PCB relays 6 A Ultra-slim 1 Pole - 6 A relay Printed circuit mount - direct or via PCB socket (according to type) 35 mm rail mount - via screw, screwless or push-in terminal sockets • 1 Pole changeover contacts or 1 Pole normally open contact • Ultra slim (5 mm), package • Sensitive DC coil - 170 mW (Dual AC/DC coil drive possible using 93 series sockets) • 5 mm wide • Low coil power • PCB or 93 series sockets • Contact AgNi • 5 mm wide • Low coil power • PCB or 93 series sockets • Contact AgNi + Au • 5 mm wide • Low coil power • PCB only • Contact AgSnO2...

34 SERIESUltra-Slim solid state PCB relays (SSR) 0.1 - 6 A Ultra-slim Solid State RelaysPrinted circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in terminal sockets • Single circuit output switching options • Silent, high speed switching with long electrical life • Ultra slim (5 mm), package • Sensitive DC Input circuits (Dual AC/DC input drive possible using 93 series sockets) • UL Listing (certain relay/socket combinations) For outline drawing see page 9 Output circuit Contact configuration Rated current/ Maximum peak current (10 ms) Rated switching voltage...