*myarchiexpo

185K

Product catalog summary

Overview
This document provides technical specifications and features for two types of devices: a PIR movement and presence detector (Type 18.5K.9.030.0000) and a switching actuator (Type 19.6K.9.030.4300), both utilizing KNX technology for energy-efficient and flexible control systems in residential and commercial buildings.

Specifications

PIR Movement and Presence Detector (Type 18.5K.9.030.0000):
- Powered via KNX bus.
- Sensing area: up to 64m² (8x8 m for movement, 4x4 m for presence).
- Mounting: Surface or recessed ceiling.
Switching Actuator (Type 19.6K.9.030.4300):
- Powered via KNX bus.
- 6 relay outputs, bistable relay ENEC approved with a maximum peak current of 120 A.
- Nominal lamp ratings: 230 V halogen (2000 W), 230 V LED or CFL (400 W), fluorescent tubes (750 W), single-phase motor load (0.5 kW).
- Mounting: 35 mm rail (EN 60715), 70 mm wide.

Features

PIR Detector:
- 2 outputs for load control and 1 output for movement/presence detection.
- Adjustable ambient light threshold and PIR sensitivity.
- Master/Slave mode for extended sensing area.
- Selectable function to inhibit ambient light threshold control.
- Reporting of light level and movement status for security purposes.
Switching Actuator:
- 6 output contacts rated 16 A 250 V AC, configurable as NO or NC.
- LED status indicator for each output.
- Time functions: ON, OFF, Blink, Staircase.
- Independent logic and analog functions for each output (AND, OR, XOR, THRESHOLD, WINDOW).
- Scenario management capabilities.

Standards and Compliance
The KNX technology complies with several international standards, including European Standards (CENELEC EN 50090 and CEN EN 13321-1), International Standard (ISO/IEC 14543-3), Chinese Standard (GB/T 20965), and US Standard (ANSI/ASHRAE 135).

Additional Information
Finder reserves the right to alter characteristics at any time without notice and assumes no liability for damages caused by incorrect use or application of its products.

Catalog excerpts

Type 18.5K.9.030.0000 PIR movement and presence detector • Supply voltage via KNX bus • Sensing area up to 64m2: 8x8 m movement, 4x4 m presence • Surface or recessed ceiling mounting SWITCH TO THE FUTURE PIR Movement and presence detector and Switching actuator with Type 19.6K.9.030.4300 Compact and powerful switching actuator with 6 relay outputs • Supply voltage via KNX bus • Bistable relay ENEC approved (Maximum peak current up to 120 A) • Suitable for lamp loads • 35 mm rail (EN 60715) mount, 70 mm wide

Open the catalog to page 1

Type 18.5K.9.030.0000 Movement and presence detector with KNX technology Type 19.6K.9.030.4300 Switching actuator with KNX technology KNX The KNX bus system and standard allows the realisation of flexible control systems to achieve energy-efficiency and comfort in the home or commercial buildings. KNX complies with: - European Standards (CENELEC EN 50090 and CEN EN 13321-1) - International Standard (ISO/IEC 14543-3) - Chinese Standard (GB/T 20965) - US Standard (ANSI/ASHRAE 135) Type 18.5K.9.030.0000 PIR movement and presence detector • Supply voltage via KNX bus • Sensing area up to 64m2: 8x8...

Open the catalog to page 2