@ finder RELAYING INNOVATION 13 SERIESElectronic step/monostable relays © (? Set and Reset command (24 V AC/DC), Reset command (230 V AC)Type 13.62Output: double pole breaking (L and N), with power failure restoration In case of power failure, when power is restored, the output returns to the state it was in before the power failure The perfect solution for switching off your system centrally with a single push button. Now with memory to restore to pre-blackout status (Type 13.62). • Supply voltage (according to type): 12...24 V AC/DC (50/60 Hz) or 110...240 V AC (50/60 Hz) • Output (according to type): 1 CO (SPDT), 1 NO (SPST-NO) or 2 NO (DPST-NO) (double pole breaking: L and N) • Reset Time: 13.61.x.xxx.0000 = 3 seconds • "Zero-crossing" load switching • Much quieter than electromechanical step relays

13 SERIES Electronic step/monostable relays Type 13.61 - Functions (RM) Monostable On closure of a switch between terminal 3 and Line (or Neutral, in case of 3-wire connection) the output contact will close, and remain so, until the switch opens. (IT) Timing step relay On initial impulse the output contact closes and timing starts for the pre-set duration T; On expiry of the time delay, the output contact opens. During the timing period it is possible to immediately open the contact with a further impulse. Switch-off delay time: 30 s…20 min. Light ON With this function set - the output contact...