*myarchiexpo

10 Series

Product catalog summary

Overview: The document provides technical specifications and features of the 10 Series light-dependent relays by FINDER, designed for automatic lighting control based on ambient light levels. These relays are suitable for various applications including garden, street, and park lighting.

Specifications:

Types: 10.32, 10.41, 10.42, 10.51, 10.61
Contact Configuration: Options include 2 NO (DPST-NO) and 1 NO (SPST-NO) with rated currents of 12-16 A.
Voltage: Available for 120 V and 230 V AC (50/60 Hz).
Load Ratings: Varying capacities for incandescent, halogen, fluorescent, CFL, and LED lamps.
Material: Cadmium-free contact material and light sensor.
Protection: IP 54 rated, suitable for outdoor use.

Features:

Light Feedback Compensation: An innovative principle patented in Italy to prevent cycling between On and Off due to sensor feedback from controlled lighting.
Sensitivity Adjustment: Adjustable from 1 to 80 lux, with a preset threshold of 10 lux.
Installation: Designed for pole or wall mounting, with some models prewired with silicone wire.
Delay Time: Initial cycles have zero delay to aid installation, with standard On/Off delay set at 15/30 seconds.

Applications: Suitable for controlling lighting in gardens, parks, streetlights, and car parks, with compatibility for slow-starting gas discharge lamps.

Technical Data:

Electrical Life: Rated for 100,000 cycles at AC1 load.
Operating Temperature: Range from -30°C to +70°C.
Approvals: Various approvals depending on the type.

Ordering Information: Includes a detailed guide on selecting the appropriate relay type based on output, voltage, and supply version.

Wiring Diagrams: Provided for each relay type to assist in installation.

Notes: Emphasizes the importance of correct installation to avoid sensor interference from controlled lighting, with a note on the limitations of the light feedback compensation principle.

Catalog excerpts

Light dependent relays 12 - 16 A Garden and night lighting Shop displays Lighting for parks Streetlights and car park lighting

Open the catalog to page 1

FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products.

Open the catalog to page 2

Relays for automatic control of lighting according to the ambient light level Integral light sensor For pole or wall mounting 10.32 - 2 NO 16 A output contacts 10.41 - 1 NO 16 A output contact • Double pole Live and Neutral switching possible with the 10.32 • Sensitivity adjustment from 1 to 80 lux • Cadmium free contact material • Cadmium free light sensor (IC photo diode) • Electronic circuit - transformer isolated • Italian Patent "light feedback compensation” innovative principle Compatible with slow starting gas discharge lamps (up to 10 minutes) • For the first 3 working cycles the delay...

Open the catalog to page 3

10 SERIES Light dependent relays 12 -16 A finder Relays for automatic control of lighting according to the ambient light level Integral light sensor For pole or wall mounting 10.42 - Two independent 16 A outputs with individual lux setting 10.51 - Miniature single 12 A 1 NO output 10.61 - Mounting on street light body • Sensitivity adjustment from 1 to 80 lux • Fixed sensivity 10 lux (± 20%) - (10.61 type) • Cadmium free contact material • Cadmium free light sensor (IC photo diode) • Electronic circuit - transformer isolated (10.42 type) • Italian Patent "light feedback compensation” innovative...

Open the catalog to page 4

Ordering information Example: 10 series light dependent relay, 2 NO (DPST-NO) 16 A contact, screw terminal connections, 230 V AC supply. * The LED is located under the terminal cover, close to the Lux adjustment knob. It indicates the contact status and assists in the test and setting of the correct light threshold level.

Open the catalog to page 5

10 SERIES Light dependent relays 12 - 16 A Internal connection Internal connection Type 10.41 Internal connection Internal connection Type 10.42 L Type 10.51 F = brown wire N = blue wire 18 = white wire

Open the catalog to page 6

10 SERIES Light dependent relays 12 Advantage of the "light feedback compensation" principle Traditional light dependent relay where the lighting being controlled influences the light level seen by the light sensor Type 10.32, 10.41 and 10.51 light dependent relay with "light feedback compensation” recalculated OFF threshold Correct functioning - provided the sensor can be shielded from the effects of the controlled lighting switching On and Off Incorrect functioning where the lamps cycle between On and Off, because their effect is being detected by the light sensor The innovative principle of...

Open the catalog to page 7

10 SERIES Light dependent relays 12 - 16 A Outline drawings Type 10.32 Please see general technical information

Open the catalog to page 8

All FINDER S.p.A catalogs and technical brochures

1T SERIES
12 Pages
Time switches 16 A
18 Pages
Movement and presence detectors
33 Pages
1C91_BLISS
4 Pages
Digital chronothermostats
10 Pages
185K
2 Pages
11 Series
12 Pages
1571_YESLY
4 Pages
15
2 Pages
1372_YESLY
4 Pages
1361
2 Pages
1T51
2 Pages
1T91_BLISS
4 Pages
1C81
2 Pages
1C61
2 Pages
1C71
2 Pages
1C51
2 Pages
S78 Series
22 Pages
781B
2 Pages
7851_61
2 Pages
78
2 Pages
General catalog
703 Pages
KNX PRODUCTS
8 Pages
YESLY
42 Pages
Thermoregulation
13 Pages
Lighting management
37 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list