SQP35 Paver

Product catalog summary

Product Overview:
The document details the specifications and features of a square LED marker light suitable for both outdoor and indoor use, designed for floor and wall installation. It features an ABS housing with a flush sandblasted glass lens, available in both trim and trimless integration options. The LED source is recessed to minimize glare and is rated for drive-over applications.

Specifications:

Design: Sustainable with a replaceable LED module and high-performance optics.
Durability: IP67 rated, UL STD 1598 compliant, suitable for wet locations, and drive-over rated up to 1500kg (3000 lb).
Construction: Aluminum fixture body with direct concrete pour housing and snap-in installation without exposed hardware.
Dimensions: Available in sizes 38x38mm (1.50”) and 45x45mm (1.77”), both with a height of 100mm (4”).
Power Options: Low power (L) at 1.2W and high power (H) at 3W, with color temperatures ranging from 2700K to 4000K.
Optics: Even illumination (LL) with a 24Vdc fixture voltage.
Feed Cable Options: Standard 0.3m (1’) cable, with options for 3m (10’), 6m (20’), and 9m (30’) cables.

Installation Options:

Trim (TM) and Trimless (TS): Options for seamless integration into various surfaces.
Housing: Available for concrete (C) and tiles (T).

Power Supply and Controls:

Remote Power Supply: Options include OT80, OT120, and OT240 with dimming capabilities.
Control Options: 1-10V dimming and DALI dimming available.

Additional Features:

Optics Accessories: Spot, flood, and graze options with various angles and tilts.
RGB Control Interface: Options for RGB color changing and dimming with 0-10V dimmers or DMX controllers.

Wiring and Installation:

Wiring Diagrams: Provided for various control and power supply configurations.
Voltage Drop Guide: Suggested wiring sizes for different load capacities.

Catalog excerpts

Specifications Sheet 1Specify remote power supply separately below. Square LED marker light for outdoor and indoor use, floor and wall installation.ABS housing with flush sandblasted glass lens for trim and trimless integration. Recessed low glare LED source. Drive over rated. Luminaire ■ Sustainable design, replaceable LED module ■ High performance optics ■ IP67, UL STD 1598, wet location, drive over rated 1500kg (3000 lb) ■ Remote power supply ■ Sandblasted tempered glass ■ Aluminum construction fixture body, direct concrete pour housing ■ Snap in installation with no exposed hardware ■ Supplied with oil and water resistant 0.3m (1') feed cable standard (C*), single color 2x1mm 2(18AWG) Size ■ 38x38mm (1.50”), 100mm H (4”) ■ 45x45mm (1.77”), 100mm H (4”) Installation ■ Trim (TM) ■ Trimless (TS) Power ■ L - 1,2W 2700K - 4000K, 40 lm ■ H - 3W 2700K - 4000K, 90 lm ■ 27 - 2700K ■ 30 - 3000K ■ 40 - 4000K ■ 2 Step MacAdam ■ CRI: > 85 Optics ■ LL - even illumination Voltage ■ 24 - 24Vdc fixture voltage Options ■ C* - standard feed cable 0.3m ( 1' ) ■ C3 - luminaire supplied with 3m (10') feed cable ■ C6 - luminaire supplied with 6m (20') feed cable ■ C9 - luminaire supplied with 9m (30') feed cable Installation Housing Order Codes ■ SQ35C - Concrete ■ SQ35T - Tiles International: Filix +385 52 616 658 filixlighting.com [email protected] North America: [email protected] Filix reserves the right to make technical changes without notice.

Open the catalog to page 1

Optics Accessories Glass finish Stainless steel trimmless adapter LED Module Concrete Installation Housing (C) Trim (TM) Floor/Wall - Tiles drainage layer 15.6” or drainage pipe drainage layer 15.6” or drainage pipe Tiles/Wood Installation housing(T) Trim (TM) International: Filix +385 52 616 658 filixlighting.com [email protected] North America: [email protected] Filix reserves the right to make technical chang

Open the catalog to page 2

Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference). Suggested wiring size* *Voltage drop guide for 24VDC. Actual Voltage drop to be calculated by installer. Dimming Drivers 2. Hi-Lume (case K) Qty. Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference). LTE (forward phase with neutral) L3D (3-wire) IX 410 381 1497 inter-lux.com...

Open the catalog to page 3

RD100 Deco RGB Interface RGB Control Interface Details Qty. Nominal Input Voltage (V) Maximum Output per channel (W) Part Number CORGBSEQ CORGBDMX Output Power Range (W) Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference). Maximum wiring distance* RGB Control Interface case dimensions (Sequencer and DMX) Wire gauge Voltage drop guide for 24VDC. Actual Voltage drop to be calculated by installer. OT RGB Sequencer RGB color changing and dimming interface controlled...

Open the catalog to page 4

All Filix catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list