SNAKE Deco

Product catalog summary

Product Overview:
The document describes a linear curvable ingrade lighting element designed for continuous runs and flexible radius adjustments. It features a stainless steel body with a transparent glass finish, suitable for uplight and wall wash effects. The product is walk-over rated and adheres to UL STD 1598 standards for wet locations with an IP67 rating.

Specifications:

Material: Stainless steel 304 with tempered glass (2x8mm thick).
Dimensions: 124mm (4.88”) length, 33.6mm (1.32”) width, 90mm (3.54”) height.
Power: 2.5W with color temperatures of 2700K, 3000K, and 4000K, delivering 230 lumens.
Optics: Available in Spot (17º) and Flood (31º) options.
Voltage: 24Vdc fixture voltage.
Installation: Direct concrete pour ABS installation housing with snap-in installation and no exposed hardware.
Feed Cable: Supplied with oil and water-resistant 0.18mm (7’) feed cable.

Performance:

Minimum radius: 314mm.
Static load capacity: 500kg (1102 lbs).
Life expectancy: 50,000 hours.
CRI: >85 for white light.

Lighting/Electrical:

Lumen output: 81lm/W for white light.
Wattage per meter: 4.8 W/m for white, 7.3 W/m for RGB.
LEDs per meter: 60 pcs/m for both white and RGB.
Beam angle: 120°.

Accessories:

Outer housing: H90mm x L130mm.
End cap: H90mm, 1 piece per tail housing.
Housing connector: 2 pieces per housing.
Cable connections: Thermoshrink suite, custom order connectors available.

Certifications:

ETL and CE certified.

Applications:

Suitable for indoor and outdoor use, including floors, terraces, gardens, walking areas, squares, and streets.

Ordering Information:

Model: SND 100 H 24/27 with various power and color temperature options.
Power supply options include on/off and integrated controls with dimming capabilities.

Catalog excerpts

Specifications Sheet 1Specify remote power supply separately below. *SND - Min order quantity 9pcs *Max run from single feed 7m (23’) Linear curvable ingrade element for contini-ous run and flexible radius adjustment. Body in stainless steel with transparent glass finish for uplight and wall wash effect. Walk over rated. Luminaire ■ Sustainable design ■ Radius, min R 314mm ■ Uplight effect ■ UL STD 1598, wet location, IP67, walkover rated 500kg (1000 lb) ■ Remote power supply ■ Tempered glass 2x8mm thick ■ Stainless steel 304 construction ■ Direct concrete pour ABS installation housing ■ Snap in installation with no exposed hardware ■ Supplied with oil and water resistant 0.18mm (7') feed cable standard ■ IP67 plug and play connector Size ■ 124mm (4.88"), 33.6mm (1.32" ), 90mm H (3.54" ) Power ■ H - 2.5W 2700K - 4000K, 230 lm Color Temperature ■ 27 - 2700K ■ 30 - 3000K ■ 40 - 4000K ■ 2 Step MacAdam ■ CRI: > 85 Optics ■ SP - Spot - 17° ■ FL - Flood - 31° Voltage ■ 24 - 24Vdc fixture voltage Installation housing order code ■ SN335 International: Filix +385 52 616 658 filixlighting.com [email protected] North America: [email protected] Filix reserves the right to make technical changes without notice.

Open the catalog to page 1

●Indoor ●Outdoor ●Floors ●Terraces ●Gardens ●Walking areas ●Squares & streets SNAKE Deco Dimensions Glass Optics Accessories Stainless Steel Body LIGHTING / ELECTRICAL Spring clip Voltage ● 24Vdc Lumen/watt ● W White 81lm/W ● RGB 90mm per meter No LED's (3.54”)White 60 pcs/m ● ● RGB 60 pcs/m (line of light) Life expectancy ● 50 000 h Beam angle ● L ( 120° ) Danijel Bertović Andrej Pamić MACHINING TIME tail module Drainage pipe or drainage layer body module head module ASSEMBLY TIME MATERIAL FINISH PART NAME Andrej Pamić ASSEMBLY NAME Danijel Bertović Min. possible Min. bend diameter ASSEMBLY...

Open the catalog to page 2

All Filix catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list