RDP100 Paver

Product catalog summary

Product Overview: The document describes a round LED marker light suitable for both outdoor and indoor use. It features an ABS housing with a sandblasted tempered glass lens, designed for both trim and trimless integration. The light is drive-over rated, supporting up to 1500kg (3000 lb).

Specifications:

Design: Sustainable with a replaceable LED module.
Protection: IP67 rated, compliant with UL STD 1598 for wet locations.
Power Supply: Requires a remote power supply, available in various configurations including dimmable options.
Glass: Satin tempered glass, 5/8” (15mm) thick, with an inner opal film.
Body: Made from ABS/Stainless steel, suitable for direct concrete pour housing.
Installation: Snap-in installation with no exposed hardware, supplied with a standard 0.3m (1’) oil and water-resistant feed cable.

Dimensions:

Diameter: 100 mm (3.9”) or 125 mm (4.9”)
Height: 120 mm (4.7”)

Power Options:

L - 2.9W, 87 lm
H - 4.8W, 144 lm

Color Temperature:

2700K
3000K
4000K
2 Step MacAdam, CRI: > 85

Optics: LL - even illumination

Voltage: 24Vdc fixture voltage

Options:

C* - Standard feed cable 0.3m (1’)
C3 - 3m (10’) feed cable
C6 - 6m (20’) feed cable
C9 - 9m (30’) feed cable

Installation Housing Order Codes:

RD100C - Trim
RD100T - Trimless

Power Supply Options:

On/Off: OT80, OT120, OT240
Integrated Controls: OT80 DIM, OT120 DIM, OT240 DIM
Controls: OT DIM 1-10V, OTI DALI DIM, OT RGB DMX DIM

Additional Information: Filix reserves the right to make technical changes without notice. Contact information for international and North American inquiries is provided.

Catalog excerpts

Specification Sheet 1Specify remote power supply separately below. 2H recommended for higher ambient light environs. Round LED marker light for outdoor and indoor use. ABS housing with sandblasted tempered glass lens for trim and trimless integration. Drive over rated. Luminaire ■ Sustainable design, replaceable LED module ■ IP67, UL STD 1598, wet location ■ Driveover rated 1500kg(3000 lb) ■ Remote power supply ■ Satin tempered glass 5/8” (15mm) thick, with inner opal film to create marker light ■ ABS/Stainless steel fixture body, direct concrete pour housing ■ Snap in installation with no exposed hardware ■ Supplied with oil and water resistant 0.3m ( T) feed cable standard (C*), single color 2xlmm2(18AWG) Size ■ 0100 mm (3.9” ),H 120mm (4.7”) ■ 0125mm (4.9”), H 120mm (4.7”) Power ■ L - 2.9W 2700K - 4000K, 87 Im ■ H - 4.8W 2700K - 4000K, 144 Im Color Temperature ■ 27 -2700K ■ 30 -3000K ■ 40 -4000K ■ 2 Step MacAdam ■ CRI: > 85 Optics ■ LL - even illumination Voltage ■ 24 - 24Vdc fixture voltage Options ■ C* - standard feed cable 0.3m ( 1' ) ■ C3 - luminaire supplied with 3m (10') feed cable ■ C6 - luminaire supplied with 6m (20') feed cable ■ C9 - luminaire supplied with 9m (30') feed cable Installation housing order codes ■ RD100C - Trim ■ RD100T - Trimless International: Filix +385 52 616 658 filixlighting.com [email protected] North America: [email protected] Filix reserves the right to make technical changes without notice.

Open the catalog to page 1

Optics Accessories Glass ﬁnish Trimless adapter(stainless steel) Led Module Fixture Body ABS housing Cable Gland Floor - Concrete/Tiles Installation Housing housing drainage pipe or drainage layer 15cm (6”) drainage pipe or drainage layer 15cm(6”) International: Filix +385 52 616 658 ﬁlixlighting.com info@ﬁlixlighting.com North America: answer@ﬁlixlighting.com Filix reserves the right to make technical changes

Open the catalog to page 2

All Filix catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list