RD100 Paver

Product catalog summary

Product Overview: The document describes a round LED marker light suitable for both outdoor and indoor use. It features a stainless steel housing with a flush satin tempered glass lens, designed for seamless integration into floor surfaces and is drive-over rated.

Specifications:

Design: Sustainable with a replaceable LED module, UL STD 1598 certified for wet locations, IP67 rated, and can withstand up to 1500kg (3000 lb).
Materials: Satin tempered glass 5/8” (15mm) thick with an inner opal film, stainless steel 304 construction, and direct concrete pour housing.
Installation: Snap-in installation with no exposed hardware, supplied with an oil and water-resistant 1’ (0.3m) feed cable as standard.

Technical Details:

Size: 3.94” diameter (100mm), 4.7” height (120mm).
Power Options: H - 4.8W (360 lm), L - 2.9W (190 lm), both available in 3000K and 4000K color temperatures.
Color Temperature: Options of 3000K or 4000K with a binning of +/-50k and CRI > 85.
Optics: LL for even illumination.
Voltage: 24Vdc fixture voltage.
Cable Options: C6 (20’/6m) or C9 (30’/9m) feed cable options available.

Power Supply Options:

Non-Dim: 75W, 120W, and 240W options with IP64 and IP67 ratings.
Single Color Dim: DALI DIM 120W and DIM 1-10V 120W.
RGB: DMX DIM RGB 3x48.

Installation Housing: Includes drainage and cable conduit knockouts, with dimensions provided for precise installation.

Contact Information: Filix provides international and North American contact details for further inquiries.

Catalog excerpts

RD100 Paver Specifications Ordering Information1 RDP Color Temp. C6-20’(6m) feed cable) C9-30’(9m) feed cable) L (2.9W) Specify remote power supply separately below. Round LED marker light for outdoor and indoor use. Stainless steel housing with flush satin tempered glass lens for seamless integration into floor surface. Driveover rated. Color Temperature Sustainable design, replaceable LED module UL STD 1598, wet location, IP67, driveover rated 1500kg(3000 lb) Remote power supply Satin tempered glass 5/8” (15mm) thick, with inner opal film to create marker light Stainless steel 304 construction, direct concrete pour housing Snap in installation with no exposed hardware Supplied with oil and water resistant 1’ (0.3m) feed cable standard, single color 2x1mm2 ,RGB 4x1mm2 Tempered glass Installation housing (stainless steel) H recommended for higher ambient light environs. C6/C9 - luminaire supplied with 20’(6m) or 30’(9m) feed cable 1’ (0.3m) feed cable standard) Power Supply Cable conduit knock out 7/8” (23mm) Drainage Conduit International: Filix +385 52 622 121 filixlighting.com [email protected] North America: filixlighting.com [email protected] Filix reserves the right to make technical changes without notice.

Open the catalog to page 1

RD100 Paver Dimensions Fixture Side view 5/8”(15mm) satin tempered glass Side view Stainless steel 304 housing 7/8”(23mm) diameter knock out International: Filix +385 52 622 121 filixlighting.com [email protected] North America: filixlighting.com [email protected] Filix reserves the right to make technical changes without notice.

Open the catalog to page 2

All Filix catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list