EN 1065 classe A

Product catalog summary

Specifications:
The document outlines specifications for various construction components, including cast iron sleeves, reinforced bases, and fork types. It specifies that the cast iron sleeve is only applicable for Code 1.

Procedures:
The document compares loading capacities as per the EN1065 norm with real loading capacities obtained through laboratory testing (Ferro-Met). It provides detailed measurements and weight specifications for different codes, ranging from A25 to A60, with corresponding minimum and maximum extension heights, weights, and loading capacities.

Standards:
The document adheres to the EN1065 standard for loading capacities, providing both the standard and actual capacities for comparison.

Recommendations:
It recommends using specific components such as pins, handles, washers, and adjustment devices, with details on their dimensions and materials. It also suggests finishing options like immersion painting, hot dip galvanization, and electrolytic galvanization.

Key Data from Tables:
The table provides a comprehensive comparison of loading capacities for different codes, highlighting the differences between EN1065 standard capacities and those obtained through testing. For example, Code A25 has a minimum extension of 1.55m and a maximum of 2.50m, with a weight range of 11.02 to 12.25 Kg and loading capacities of 25.88 kN (EN1065) and 31.72 kN (Ferro-Met).

Catalog excerpts

Puntelli telescopici ad alta portata Heavy duty telescopic props Etais telescopiques serie lourde Puntello EN 1065 classe A Prop EN 1065 class A Etai serie EN 1065 classe A ■ Gancio 0 14 mm Maniglie del manicotto 0 12 mm, maniglia della ghiera 0 16 mm R'ondella piana da 5 mm Dispositivo di regolazione fine a manicotto o a ghiera esterna Lunghezza manicotto 150 mm Verniciatura per immersione / Zincatura a caldo / Zincatura elettrolitica Pacchi da 50 pezzi ■ Pin 0 14 mm Sleeve's handles 0 12 mm, external thread's handle 0 16 mm Level washer of 5 mm Fine adjustment with steel sleeve or with external thread Sleeve's length 150 mm Immersion painting / Hot dip galvanization / Electrolytic galvanization Packages of 50 pieces ■ Broche 0 14 mm Poignees 0 12 mm, poignee de filetage apparent 0 16 mm Rondelle plate de 5 mm Ecrou pour le reglage fin ou avec filetage apparent Ecrou longueur 150 mm Peinture par immersion / Galvanisation a chaud / Galvanisation electrolytique Colis de 50 pieces cercle Code: _R ■ Rinforzo di base Reinforced base Renfort de pied Code: AG ■ Manicotto di ghisa /Solo per cod. 1 Cast iron sleeve /Only for code 1 Ecrou fonte /Seulement pour cod.1 Code: _NL ■ Forcella tipo NL Fork type NL Fourche modele NL * In tabella si riportano sia le capacita di carico imposte dalla norma * In the table above we outline the difference between the EN1065 * Dans la fiche nous signalons soit les capacites de charge prevues par EN1065, sia quelle ottenute tramite un codice di calcolo simulando il norm loading capacity and the real loading capacity, obtained la norme EN1065, soit la capacite de charge reelle, obtenue par les carico a compressione semplice (Ferro-Met). during products’ laboratory testing (Ferro-Met). tests des produits effectues au laboratoire (Ferro-Met).

Open the catalog to page 1

All Ferromet catalogs and technical brochures

Archived catalogs

CATALOGUE 2016
130 Pages