1. Catalogs
  2. FERMOD
  3. Electronic Automatic Kit 5010

Electronic Automatic Kit 5010

Electronic Automatic Kit 5010

Electronic Automatic Kit 5010

Product catalog summary
Overview: The document presents the Model 5010 electronic automatic kit designed for sliding doors up to 200Kg, compatible with various manual systems without restrictions on door size or opening side. It is a patented system by FERMATIC.
Features and Advantages:
  • Reduced installation and commissioning time due to optimized design.
  • Safety ensured by vertical buffer and horizontal photo cell.
  • Controlled by an electronic board and programmable microprocessor with numerous features.
  • Settings adjusted via a keypad with an LCD screen.
  • Smooth and silent operation with identical equipment suitable for all door openings and sizes.
  • Power supply: 220 V single-phase.
  • Information codes displayed on LCD for settings and diagnostics.
  • Cycles counter included.
Options:
  • Radar
  • Induction loop
  • Flashing light
  • Minus temperature option
  • Locks
  • Antistatic PVC cover
Compliance: The kit complies with UKCA Directives and Standards, ensuring safety according to its use and destination.
Operation Types:
  • Standard: Opening and closing by command order.
  • Timer 1: Opening by command order, automatic closure after timer lapses.
  • Press and hold mode: Opening and closing by press and hold command.
Additional Information: FERMOD reserves the right to modify products without notice. The document includes contact information for FERMOD's headquarters in Senlis, France.
See more

Catalog excerpts

Electronic Automatic Kit 5010-1

Electronic Automatic Kit 5010 Automatic kit for sliding doors up to 200Kg Patented system A single model 5010 electronic automatic kit which covers all manual systems listed below without restrictions of opening side or door size: 2120 - 2130 - 2150 2320 - 2420 3430 - 3530 - 7530 Features and advantages: Radar Induction loop Flashing light Minus temperature option Locks Antistatic PVC cover • Reduced installation time: optimized design of the Kit 5010 provides very simple mechanical mounting and electrical wiring. • Vertical buffer and horizontal photo cell ensure the door and operators safety. • This automatic kit is controlled by an electronic board and programmable micro processor integrating numerous features to fulfil everyday requirements. • All settings (starting, driving force) are made on a keypad with LCD screen. The electronic automatic kit 5010 complies with the UKCA Directives and Standards through safety devices according to its use and destination. FERMATIC / Autom

 Open the catalog to page 1
Electronic Automatic Kit 5010-2

Electronic Automatic FERMOCLEAN Kit 5010 2920 • • • • • • • • Reduced commissioning time (quick start sheet) Simple programming to adjust operation (timer, opening and closing speeds, driving force…) Automatic setup of the opening and closing directions of the door Smooth and silent operation Identical equipment and parts suitable for all door openings and sizes (horizontal or 90° motor mounting) Power supply 220 V single-phase Information codes on display LCD screen: settings and diagnostic assistance Cycles counter 3 operation types available: • Standard: opening and closing by command order...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.