LA TROBE UNIVERSITY, AUSTRALIA Product Specifications Backrest & Seat • Fully Upholstered back outer panel. • The inner structure is made of 19x 19x1.6mm thks. Hollow section, upholstered with HR polyurethane foam density 45 kg/m3 and upholstered with fabric covers. • Fully upholstered seat with padded cover. • Inner structure made of Ø21mm x Thk. 2mm tubular steel frame, integrated with grid foundation in HR foams with a density of 60 kg/m3. • Tip- up seat with counterweight systems and being lift-up by means of gravity. Totally silent and maintenance free. Upholstery Material • Refer to Ferco standard fabric / leatherette / leather Charts. Wrimatic • Heavy-duty die-cast aluminum alloy finished in oven baked epoxy powder coating to 60 micron. • The arm consists of a complex swivel joint in precisely fabricated stainless steel with polish finish. • Housed within the swivel joint is a maintenance-free bearing for long-term operation cycles. • Static bearing load > 234 kgf. • Dynamic bearing load > 40 kgf. • Swivel plate supporting the writing board made of heavyduty plate die-cast aluminum alloy in epoxy powder coating. • The arm shall be clamped to the horizontal beam by means of a heavy-duty plate (die-cast aluminum alloy), with use of two allen cap screws. • Writing board made of 10mm thick injection moulded ABS. Size: 300mm by 425mm. Fire Safety • Fire Safety - Flammability compliance with California Bulletin 117 and international regulations in their last issues and particularly with safety regulations. • Flammability compliance with BS 5852 : 2006 Section 3 Ignition Source 0 & 1. Metal Finishing • All metal parts exposed shall be stripped and cleaned with iron phosphate, hot water rinsed and then chromic acid rinsed. • All metal parts are coated with an epoxy finish of at least 60 microns for indoor use and hot dipped galvanize to BS729 for outdoor. • Conformity with BS-6496 hardness test. Standards • Rectangular hollow section of 76 x 38mm structural steel beam. • Beam end protected with nylon capping. Advantages • Comfort especially studied according to fundamental criteria of ergonomic. • Durability of the chair & after sales service for all spare parts of the model. • All parts constituting the chairs have passed endurance tests. Warranty • Refer to Ferco product warranty. Options • Row lettering Type A • Row lettering Type E with Aisle light • Beam round row lettering • Round seat numbering • Embroidery seat numbering / logo • Diffuser leg • Adjustable height Wrimatic • Free standing leg • GPO socket provision • Power point provision • Castor wheel • Plastic back outer • Wooden back / seat outer • Removable leg • Seat numbering on Wr