FCB-M - Datasheet MARACANA STADIUM, BRAZIL Product Specifications Backrest and Seat • The seat and backrest are made of blow moulded high impact co-polymer with double wall. • Polypropylene. • Flame Retardant with U.V inhibitors. • Built-in U.V inhibitors ensure no significant colour or plastic deterioration for a period of five years (BS ENISO 4892 – Specification for U.V Stabilization). • Individual of 2 piece high quality tip-up seat, designed according to fundamental criteria of ergonomic comfort for arena, auditorium and sports venue seat with seat lifting to an upright uniform position when not occupied. Metal Finishing • All metal parts exposed shall be stripped and cleaned with iron phosphate, hot water rinsed and then chromic acid rinsed. • All metal parts are coated with an epoxy finish of at least 60 microns for indoor use and hot dipped galvanized to BS 729 for outdoor use. • Conformity with BS-6496 hardness test. Plastic • Refer to Ferco plastic color chart. Advantages • Comfort especially studied according to fundamental criteria of ergonomic. • Durability of the chair & after sales service for all spare parts of the model. • Curved backrest design for maximum comfort. Fire Resistance • Fire Safety - Flammability compliance with California Bulletin 117 and international regulations in their last issues and particularly with safety regulations. • Flammability compliance with BS 5852 : 2006 Section 3 Ignition Source 0 & 1. Warranty • Refer to Ferco product warranty. Options • FCB-M seat numbering • FCB armrest • Power point provision • Padded seat • Retractable seating • Riser mounted leg • Beam mounted leg • 700R table • Ultra Violet and Fire retardant • Flammability complianc