ATHENA – Datasheet
1Pages

ATHENA – Datasheet INTI INTERNATIONAL COLLEGE SUBANG, MALAYSIA Product Specifications Backrest • Inner panel shall be made of 7plys @ 13 mm thick plywood covered with high resilience foam, density 45 kg/m³. Upholstered with padded cover. Seat • Fully upholstered seat with padded cover. • Inner structure made of Ø21mm x Thk. 2.6mm tubular steel frame, integrated with grid foundation in HR foams with a density of 60 kg/m3. • Tip- up seat with counterweight systems and being lift-up by means of gravity. Totally silent and maintenance free. Fixed table • 18mm thickness wooden table and wooden front panel with maica laminated and PVC black edging. Standards • Centre and end standards are of lateral pedestal design made of 38mm x 38mm x Thk 2.3mm square hollow section continuous welded to a 6mm thickness steel plate. Metal Finishing • All metal parts exposed shall be stripped and cleaned with iron phosphate, hot water rinsed and then chromic acid rinsed. • All metal parts are coated with an epoxy finish of at least 60 microns for indoor use. Upholstery Material • Refer to Ferco standard fabric / leatherette / leather charts. Advantages • Comfort especially studied according to fundamental criteria of ergonomic. • Durability of the chair & after sales service for all spare parts of the model. • Large choice of fabrics. Fire Safety • Fire Safety - Flammability compliance with California Bulletin 117 and international regulations in their last issues and particularly with safety regulations. • Flammability compliance with BS 5852 : 2006 Section 3 Ignition Source 0 & 1. Warranty Refer to Ferco product warranty. Options • Row lettering type A • Row lettering type E with Aisle light • Round seat numbering • Embroidery seat numbering / logo • Flammability compliance with BS