3 in 1 Combination Unit PAB
3Pages

High Speed Hand Dryer Combination Unit 02.4031.2x 50 Cable entry in rear Specification Recess mounted acrylic faced combination unit with high speed hand dryer, paper towel dispenser and waste bin. Model number 02.4031.2x.xx* with right hand hinged, acrylic faced door (Colour to customer’s specification), vertically brushed satin stainless steel dryer bowl and chutes, stainless steel back boxes and bin. Rated: 240V, 50/60Hz, 1000W, IP23. Manufactured by FC Frost Ltd. *suffix “x.xx” allocated upon order Recommended wall opening for proud mounting: 360w x 1562h x 114d (Flush mounted add 3mm all round to overall door size) N.B. For surface mounted version order 02.4431.2x.xx Material • Door Fascia: 4-5mm acrylic to ISO 7823-1 (Acrylic thickness may vary depending on acrylic manufacturer. Contact fc Frost with your colour specification) and stainless steel backed. • Bowl & Chutes: 0.7mm satin finish stainless steel grade 1.4301 (304) to BS EN 10088-1 • Back boxes: 0.9mm stainless steel grade 1.4301 (304) to BS EN 10088-1 • Bin: 0.7mm stainless steel grade 1.4301 (304) to BS EN 10088-1 Waste Bin Capacity • 10 litres FC Frost Ltd reserves the right to amend the design or dimensions without formal notice © FC Frost Ltd 2015

High Speed Hand Dryer Combination Unit 02.4031.2x Operation Paper Towel Dispenser: To refill, Place suction cup (supplied) on left hand side of door face and pull open. Place paper towels between guides. Hand Dryer: • Shake excess water from hands • To activate dryer place hands in dryer bowl and repeatedly turn hands over until dry. Heater has built in safety thermal cut off. Sensor has 1 second inactivity cut off. Waste Bin: The bin can be accessed by placing suction cup (supplied) on left hand side of door face and pulling open. Emptying of bin: Open door, slide bin forward and remove...

FC Frost Limited Bankside Works Benfield Way Braintree Essex CM7 3YS United Kingdom T: +44 (0)1376 329111 F: +44 (0)1376 347002 E: sales@fcfrost.com W: www.fcfrost.com High Speed Hand Dryer Combination Unit 02.4031.2x Care and Maintenance Periodic cleaning of the unit is recommended to ensure optimum performance. • Clean door panel with an acrylic cleaner or detergent and wet cloth. Dry with a clean soft cloth. Never clean with just a dry cloth, this may cause scratches. • To maintain finish of stainless steel parts use any industrial steel cleaner, polishing along the material grain with a...