Automatic slatted covers

Automatic slatted covers

FAVARETTI GROUP - SWIMMING POOL COVERS The installation of an automatic slatted cover is the best possible solution to protect your family and to optimize your investment guaranteeing, over time, that the pool can remain a place of recreation and relaxation for the home. The exceptional insulating properties guarantees an avarage annual savings of 40% on management costs: by completely blocking the phenomenon of evaporation, you will get huge savings on heating costs, chemical products and water top-up. The cover ensures a 360° protection during the whole year: in summer it drastically reduces...

Automatic slatted covers Debris such a leaves, dirt, insects and bird droppings are not only unsightly in a pool but also provide nutrients for algae and bacteria to feed on. When the pool is covered these contaminants will be kept out of the water, greatly improving the quality and appearance of the pool.

FAVARETTI GROUP - SWIMMING POOL COVERS

Automatic slatted covers The automatic slatted covers consists of high-quality PVC slats and ensure maximum safety for childrens and pets. A cover provides risk-free fun: let your children run around, play and have fun everywhere in the garden with complete peace of mind. Our covers are compliant with the safety standard NF P 90-308.

FAVARETTI GROUP - SWIMMING POOL COVERS

Automatic slatted covers

FAVARETTI GROUP - SWIMMING POOL COVERS The covers are completely custom made and can be installed on new or existing pools. Choose the solution that best suits your needs!

TAPPROLL SLATS: PVC treated Calcium Zinc, shockproof and anti-brush. Eavy metal free and 100% non-toxic. Ultrasonically welded end-plugs. The end-plug colour matches the slat colour. Cover end-plugs available in 3 different sizes. These slats ensure excellent loadbering and are compliant with the french safety norm NF P 90-308. Slats width: 77 mm. Available colours: white, grey, blue and sand. THERMO SLATS: High-quality PVC slats co-extruded and therefore integrally bonded with hinges made of PUR (polyurethane). The foamed design of the PVC slats ensure excellent long lasting and good load-bearing....

Colored end-caps New control panel with display RADIOART: Smart design remote controls super responsive. The Kit includes: led indicator, wall support, receiver board and antenna.  TP 1 Perfect solution for swimming pools in the planning stage. The wrapping up roller is inserted in the basin divided from the pool by a partition wall. Therefore, once re-wrapped the cover won’t disturb bathers in any way. The engine is lodged in an exterior well. Compliant with the safety standard NF P 90-308.

 TP IN This automatic slatted cover does not require any structural changes of the swimming pool. It comes with tubular engine and the winding system can be covered with a wood or PVC material supported by an alluminium or steel beam. It is a perfect solution for existing pools. Available on request the PVC dividing wall. Compliant with the safety standard NF P 90-308.  TP 2 Interesting solution for existing pools. The roller is set on the pool floor and the engine is housed in a dry shaft next to the winding system. Available with a PVC dividing wall or cladded using PVC slats so that it forms...

 TP 3 This solution is fitted underneath the pool floor and covered with a walkable grid. The engine is housed in a dry shaft next to the winding system. Excellent solution for swimming pools in the planning stage.  TP 4 The most exclusive solution for practically every pool shape. This solution is fitted underneath the pool floor. A flap lid covered with white plastic profiles uncovers the roll-up mechanism if needed and allows the slatted cover to swim upward in the pool.

 TP 5 This solution is particularly interesting when planned early. To do this, a recess is created in the pool wall, this has inclined slope to the normal pool wall upwards to the water surface. No grid is required on the pool wall and the whole area of the pool can be used. Certainly one of the most inconspicuous rollup devices.  TP BEACH The principle of TP BEACH consists of submerging the beam and its cover deck. It is the ideal solution for the perfect aesthetics integration of the automatic cover in the swimming pools. The pool surface is optimised by the use of the space occupied by the...

 TP FT Electric TP FT systems are installed at the pool edge. Combined with a matching seat or sun lounger (optional), this roll-up system is not only practical, but also very aesthetic and easy to maintain. Our seats, which we have developed for floor mounted TP FT systems, are manufactured as standard of stainless steel and cladded with white PVC profiles or wood. Compliant with the safety standard NF P 90-308.  LIGHTROLL The EcoRoll systems offer a good and especially value for money opportunity for space saving and careful storage of your slatted cover. These rollup systems are not only practical,...

www.favarettigroup.it Headquarters: Via Quinta strada 5/7 ZI 35023 Bagnoli di Sopra (PD) ITALIA T: +39 049 5380535 F: +39 049 9539124