AC6 laminate flooring technical specifications Collections: MASTERPIECES, ELEGANCE, INDUSTRY TILES, STONE EFFECTS, RETRO, SENSE. GENERAL CHARACTERISTICS CHARACTERISTICS REQUIREMENT ∆taverage ≤ 0,50 mm to nominal value max. - tmín. ≤ 0,50 mm Length of the surface layer, l: Widht of the surface layer, w: ∆waverage ≤ 0,10 mm to nominal value w max. - wmín. ≤ 0,20 mm Straightness of the surf layer, s: Flatness of the element, f: - Width - Length Openings between elements, o: Gaps Height difference between elements h: Dimensional variations after changes in relative humidity, δl, δw Light fastness Maximum individual values: W,concave ≤ 0,15 % fW,convex ≤ 0,20 % f l,concave ≤ 0,5 % l,convex ≤ 1 % Contrast between exposed and unexposed zone: grade ≥4 (gray scale) Static identation No visible changes. Example: <0.05 mm identation using a straight steel cylinder, Ǿ= 11.3 mm Surface soundness Abrasion resistance Impact resistance Small diameter ball > = 15 N Large diameter ball> = 1000mm CLASS 33 HEAVY COMMERCIAL USE CLASS 23 HEAVY DOMESTIC USE Locking strength for mechanically assembled panels (Opening 0,2 mm) Effect of a castor chair No changes in appearance or damage, as defined in EN425. Using wheel defined in EN 12529 (Tipe W) Thickness swelling

ADITIONAL REQUIREMENTS CHARACTERISTICS Humidity at dispatch from the manufacturer The elements shall have a moisture content of 4 -10 % Appearance, surface defects Whitout visible effects 1m of distance CLASSIFICATION IN ACCORDING EMISSIONS - COV CHARACTERISTICS EN 16000 (French decree n° 2011-321 & arrêté of 19/04/2011) ÉMISSIONS DANS L’AIR INTÉRIEUR* Classified A+ *A+ (better) / C (worst) * Information sur le niveau d'émission de substances volatiles dans l'air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A + (très faibles émissions) à C (fortes...