PointSense Heritage Rapid 3D modeling by integration of point clouds and photos PointSense Heritage is suitable for documentation in built heritage conservation, archaeological history research, as well as for complex three dimensional archaeological excavations. Meaningful and detailed image plans can be created or 3D models can be constructed from laser scan data and photos. Special features Fast construction of 3D models thanks to the integration of point clouds and photos Photogrammetrical functionality as a supplementary tool Computation of real orthophotos Generation of detailed image plans in a plane, of point clouds and photos of towers, vaulted ceilings, ceiling paintings, facades, roofs, etc... Automatic image orientation from ReCap Photo and AgiSoft PhotoScan import Classical features Process thousands of millions of surveyed points with AutoCAD Intuitive navigation in the planar view Combination of scanner data, CAD and photos Efficient Data management: Isolation, colouring, masking and naming of point cloud regions High-tech documentation in AutoCAD of historical buildings and archaeological sites these photos are placed automatically in the correct place in the point cloud. PointSense Heritage makes functions available for laser scanner data originating from documentation of built heritage conservation and archaeological excavations (such as image plans, floor plans, sections and 3D models, etc.), and where applicable photo like results, can be generated. This combination, from within AutoCAD, of laser scanning and photogrammetry offers interesting possibilities together with the possibility of high definition and precise results. Classical Photogrammetry in AutoCAD Planar Views from Scans True orthophotos are computed through the combination of point clouds and photos and can be used as the basis for image plans. In the computation the point cloud provides the precise surface information while the color information used in the image produced is gained from the photos. True orthophotos usually have a higher resolution and are denser than the orthophotos produced solely from point cloud data. The planar view of the scan data offered by PointSense produces a photograph like clear picture of the individual scans and allows a significantly more intuitive navigation of the scan data as in the depiction of the point cloud. The unintentional snapping of underlying points is not possible in this view. Fast construction of 3D models PointSense Heritage extends AutoCAD by adding photogrammetrical functions. High definition, oriented photos support the processing of the laser scanner data and allow the fast construction of 3D wireframe models and surfaces. The photos from commercially available digital cameras are oriented and embedded into the drawing. The geometric objects drawn over Identical points in at least two photos taken from different points can be interpolated by alternately selecting the points in the photos. PointSense Heritage calculates the 3D coordinates of the points. Therefore, it is possible to conveniently carry out modelling in space without having to use laser scanner data. Create real orthophotos Unrolled image plans By unrolling point clouds and photos of towers, vaulted ceilings, ceiling paintings, facades, roofs, etc. detailed, true to scale image plans can be generated, that can be additionally supplemented with further CAD information

Technical Requirements Platform PointSense Heritage is compatible with AutoCAD and associated products such as Civil 3D, Architecture and Map 3D for versions 2013 and above. In addition, PointSense will only work with 64-bit operating systems when using version 2015 and above. Should older Autodesk products be used, please contact your FARO representative. Operating system Dependent on the version of AutoCAD being used, recommended is a 64-bit system. Hardware requirements Computer: Graphics card as recommended by Autodesk, RAM at least 8 GB, better 32GB and more, processor at least 2.5 GHz,...