TABLE SLAB SYSTEM QUICK
24Pages

TABLE SLAB SYSTEM TF QUICK TAVOLO SOLAIO TF QUICK

AVVERTENZE SULLA SICUREZZA SAFETY WARNINGS • The respect of these instructions does not exempt from compliance with all safety regulations in force in the country where you use the system. • These instructions are intended for users of TF products and systems. Each one must be aware of the contents of this manual; in case they have difficulties in reading the same, the employer has to provide education of the same • The User’s Manual instructions must always be available at the workplace for all operators • This manual, even if used in order to draw up a Method Statement, will not...

TABLE SLAB SYSTEM TF QUICK | TAVOLO SOLAIO TF QUICK SYSTEM DESCRIPTION TF Quick is the Slab Table System wich guarantees the maximum results in terms of safety, speed and productivity realizing any typology of slabs. TF Quick è l sistema Tavolo Solaio che garantisce i massimi risultati in termini di sicurezza, velocità e produttività per svariate tipologie costruttive HIGH WORK LOADS: the standard system configuration (2 props x waling) work with total safety up to 60cm slab thickness (depending on tables size); when slab thickness exceed the 60cm, other than apply “intermediate” auxiliary...

TECHNICAL DESCRIPTION: Hereunder the system components in detail DESCRIZIONE TECNICA: Di seguito i componenti del sistema in dettaglio COVERING SHEET | MANTO di RIVESTIMENTO Following project specs the “right” covering can be defined, choosing between plywood of variable phenolic coating (based on requested surface quality) or H layers panels, or, 3 for an high number of re-uses, a plastic8coated plywood. D Il manto di rivestimento può essere definito nel rispetto delle specifiche di progetto, , scegliendo tra multistrato con protezione fenolica di grammatura variabile (in base alla...

TABLE SLAB SYSTEM TF QUICK | TAVOLO SOLAIO TF QUICK SWIVEL HEAD | TESTA A RIBALTA The Hot deep galvanized steel Swivel Head is the main component of the system; strong and easy to use, it act as connection between super structure and props, and enable the shifting of “ready to use” table modules in any conditions and structure geometry, thanks to it’s tilting mechanism. The possibility to shift modules, complete with props, virtually horizontally, squeeze the height of tables down to the minimum, so that even small openings are enough to pass through using the lifting fork. La Testa a...

SHIFTING PHASE - HEAD’S TILTING | FASE DI TRASLAZIONE – INCLINAZIONE TESTA The swivel head have two main mechanism to be activated: the first is the wedge used to fix the props connection, wich will be closed in “working position” by use of a hammer; the secon the lever wich, pushing the lower part, will permit to incline the head and consequentely the prop at two main angles, one of wich will mantain the props almost horizontal in order to bypass perimeteral obstacles. Pushing the prop back in vertical position will automatically block the lever mechanism. TF STEEL PROPS | PUNTELLI TF...

TABLE SLAB SYSTEM TF QUICK | TAVOLO SOLAIO TF QUICK SYSTEM GRID | GRIGLIA DEL SISTEMA (STANDARD MODULES / MODULI STANDARD ) Table 2,50 x 5,00 m | Tavolo 2,50 x 5,00 m Basic grid Griglia base D Gianluca CHECKED Trasporto e Stoccaggio Tavoli-1 SHEET 1 OF 1

FAST, EASY and SAFE SYSTEM ERECTION | ARMO RAPIDO, SEMPLICE E SICURO DEL SISTEMA After the connection of Steel Props to table’s Swivel Heads, wich can be done by using a TF2 load bearing tower as “working base” or similar solutions, one only operator can, using the Shifting Trolley or similar devices, shift the module in planned position. As per Props connection, also side protection devices as system’s handrails can be assembled from the ground and only once for all pouring phases, with the resulting big advantages in working time and safety. Dopo il collegamento dei puntelli alle teste a...

TABLE SLAB SYSTEM TF QUICK | TAVOLO SOLAIO TF QUICK SYSTEM LOADABILITY & DIMENSIONING Following a general overview of system loadability in different configurations, to give users a general guide line. For specifically project related needs, TF technical dept will support you in planning the most suitable system configuration. PORTATA E DIMENSIONAMENTO A seguire una panoramica generale della capacita di carico del sistema in diverse configurazioni, cos! che gli utilizzatori possano avere un quadro di riferimento. Per le esigenze di progetti specifici, il dipartimento tecnico TF e a...

C LOS U R E A REAS SYSTE M SO LU TIONS ZONE D I COM PENSAZ IONE SOLUZI ONI D I SISTEMA STANDARD CLOSURE – DIMENSIONING | COMPENSAZIONI STANDARD – DIMENSIONAMENTO Along the transversal table direction, the insertion of a closure panel strip is always necessary, with variable width, going from a minimum of 15cm wich is the system standard (covering panel is 15cm “shorter” than the nominal system size), to a maximum width as the result of choosen closure variant, as per following figures and tables. With value “b” equal to zero (wich means tables nominal size “touching” eachothers) so, the...

TABLE SLAB SYSTEM TF QUICK | TAVOLO SOLAIO TF QUICK EDGE MODULES | MODULI PERIMETRALI WALKING PLATFORMS A correct system planning will consider the right positioning of perimeteral tables so that the previously assembled handrails can provide a wide enough walking space, with no need to add any special platform; the table itself will act both for pouring the perimeteral slab’s area and as a working and walking platform. Mentioned tables will maintain this configuration to the end of the works, so that no dangerous and time consuming works, as dismantling and mounting again the handrails for...

SYSTEM SHIFTING | TRASLAZIONE DEL SISTEMA HORIZONTAL – BY SHIFTING TROLLEY ORIZZONTALE – CON CARRELLO DI TRASLAZIONE TF Lifting Trolley, wich can be used by itself or combined with the Shifting Unit, given the already integrated electrical lifting mechanism, permit a fast lifting/lowering of tables and the sub-sequent shifting to next working position. Il carrello di sollevamento TF, utilizzabile in abbinamento ad unità di movimentazione o autonomamente, grazie al sistema di sollevamento elettrico integrato, permette un rapido sollevamento/abbassamento del tavolo, per poi consentire...