VORTAIR® EC SERIES
3Pages

Air flow tests based on ISO5801: 2007 Noise tests based on ISO13347: Part 3, 2004 Special Note Diameter sizes 630 and 710mm can be pre-configured to suit specific sensors and specific applications. Please advise Fantech of these parameters at the time of order. EC motors should be directly connected to their appropriate AC supply. EC motors should not be regularly power cycled. DESCRIPTION ® The Vortair EC Series of In-Line Mixed-Flow fans incorporate the latest state-of-the-art, energy saving EC motor technology and are most efficient where conditions vary during the course of the day. They feature fully integrated, infinitely variable speed control which eliminates the need for external VSDs, current overloads and motor phase protection. Optional matching sensors monitor the ambient conditions and provide real time feedback to the fan. The fan's on-board microprocessor adjusts the speed and therefore modulates the ventilation rate to match the specific requirements of the area. The Vortair® EC fans are a simple "plug and play" system which means installers do not need to have specialised control programming knowledge. Vortair EC Series feature a heavy duty galvanised steel circular fan casing that can be retrofitted into axial fan installations that may require greater static pressure. They are available in 5 case sizes ranging from 450 to 710mm diameter (280 to 450mm impeller diameters). Typical Applications Commercial and industrial supply or exhaust applications such as shopping centres, office buildings, exhibition centres, hotels, health centres, schools and universities. Features • Innovative mixed-flow impellers produce powerful airflows without generating high noise levels. • EC motor features reverse polarity protection, locked rotor protection and soft starting. • No additional electrical protection such as contactors are required. • All models supplied standard with 0-10V control input. Diameter sizes from 400mm and above can be pre-configured to suit specific sensors and specific applications. • A full range of sensors are available including differential pressure, humidity, temperature, air velocity and pollutant. • Can be run as an independent ventilation source or integrated into most building management systems. • Heavy duty galvanised steel construction. • Can be retrofitted into standard 450 to 710mm axial fan installations. • Mixed-Flow impellers suit applications where medium to high air pressure is required. • Can be mounted in any position. Construction Mixed-Flow impellers are made from high performance injection moulded composite material. Casing made from heavy duty galvanised steel. Motors Type - electronic commutated (EC) motor. Electricity supply - 200-277V single-phase, 50/60Hz Bearings - sealed-for-life, ball. See page O-7 for details on motors. Integrated EC-Controller providing infinite speed control. Internal Thermal Protection Integral thermal overload protection is supplied as standard. Testing SUGGESTED SPECIFICATION The duct mounted fans shall be of the Mixed-Flow Vortair® EC Series as designed and manufactured by Fantech Pty Ltd. and be of the model numbers shown on the schedule/drawings. Impellers shall be made from high performance injection moulded composite plastic material. They shall be driven by EC external rotor motors with integrated EC controller and integral thermal overload protection. Diameter sizes 630 and 710mm shall be pre-configured to suit the selected sensors and the required applications. They shall include a heavy duty galvanised steel circular fan casing. All performance data shall be for a complete assembled unit based on ISO5801: 2007 for air flow and ISO13347: Part 3, 2004 for noise. DUCT MOUNTED FANS

gv - Volume Flow, m3/s dB(A) @ 3m: Inlet noise = Qv - Volume Flow, m3/s dB(A) @ 3m: Inlet noise = J - Volume Flow, m3/s dB(A) @ 3m: Inlet noise = gv - Volume Flow, m3/s dB(A) @ 3m: Inlet noise = ANCILLARY EQUIPMENT Controllers & Sensors Ref Section M Aviator Touch & Aviator Touch PRO Controller Ref. Aviator Brochure gv - Volume Flow, m3/s dB(A)@3m: Inlet noise Q DUCT MOUNTED FANS B-33E

DUCT MOUNTED FANS © FANTECH 2020