Wall Window & Ceiling.qxd STYLVENT SERIES Stylvent Series The Stylvent Series can be wall or window mounted and is suitable for applications ranging from conference rooms, living rooms, restaurants, swimming pools to shower rooms etc. in homes and offices. Models for exhaust or supply applications available. Construction All units have weather and impact resistant housings with integral shutters. Motors Type:- 150, shaded pole induction motor 230 and 300, external rotor motor Electricity supply:- 220-240V, single-phase, 50Hz. Bearings:- 150 - sleeve; 230 and 300 - sealed-for-life ball Max. amb. temp.:- 150 - 45ºC; 230 and 300 - 50ºC Motor protection:- 150 - open; 230 and 300 - IP44 See pages N-3/4 for details on the shaded pole motors and pages N-2/3 for details on external rotor motors. Internal Thermal Protection The above graph shows exhaust flow rates only. The approximate flow rate in supply mode is 50% of high-speed exhaust rate. TECHNICAL DATA Model Number ‘AE’ Range* - switch operated HV-150.. 150 - internal fuse; 230 and 300 - auto-reset type. Special Features ‘AE’ Range Can be wired for exhaust or supply air. ANCILLARY EQUIPMENT For dual use, a reversing switch is available for sizes 230 and 300 only. Wall Mounting WALLRODSPK - Wall rods Ref. J-10 A kit of threaded rods and sleeves is available as an extra to mount the Stylvent fans onto walls ranging from 25 to 300mm thick. Wiring Diagram See page M-8, diagram ER 6, 8. SUGGESTED SPECIFICATION The Stylvent Series of wall/window fans shall be as supplied by Fantech Pty. Ltd. and be of the model numbers shown. HV - Fan Type Fan Diameter in mm AE - standard range WALL, WINDOW & CEILING MOUNTED FANS

Wall Window & Ceiling.qxd STYLVENT SERIES DIMENSIONS A Hole diameter (minimum) The SRS Reversing Switch enables the HV-230AE and HV300AE Stylvent fans to operate in both supply and exhaust modes. Optional external weather cap to suit Stylvent fans for exposed wall mounted locations, provides additional protection against high wind and rain. Also suitable for roof mounting on skylights and atriums. The SRS Reversing Switch is recess mounted, has an enclosure rating of IP30 and has a 70W × 114H switch plate. A recess depth of 25mm is required for mounting. HV-150CAP - suits HV-150AE fan HV-230CAP...