BLUE RHINO CENTRIFUGAL FANS: SWSI
4Pages

DESCRIPTION The Blue Rhino range of single width, single inlet (SWSI) centrifugal fans features a backward-curved laminar impeller and a heavy duty, fully welded construction. Their innovative design integrates a Variable Speed Drive (VSD) which eliminates the need for a high maintenance belt and pulley system. They are driven by a direct drive motor and are available hot dip galvanised or a durable blue powder coated finish. The range is available in 15 impeller sizes, extending from 12 inch (305mm) to 44 inch (1120mm) diameter. Smaller sizes come in a box type design and larger sizes with a pedestal mounted motor. Typical Applications Designed for a wide range of supply or exhaust air applications such as shopping centres, food halls and car parks. Features • Casings and impellers are made of high strength fully welded mild steel • Controlled with VSD which eliminates the need for high maintenance belt and pulley system • VSD can be factory pre-configured to suit application, creating a time saving plug and play system • Fitted with inlet spigot and discharge flange • Comes standard with inspection hatches and drain plugs • Clockwise impeller rotation is standard, anti-clockwise rotation is available upon request • Driven by a reliable direct drive motor design • Comes standard hot dip galvanised or with a durable blue powder coated finish Box design models • Available in impeller diameter sizes from 12 to 30 inch • Efficient and compact design • Can be rotated onsite to 0, 90 or 180° position to suit installation requirements Pedestal design models • Available in impeller diameter sizes from 27 to 44 inch • Available in 0, 90 or 180° discharge angles Construction Fully welded mild steel casings. Hot dip galvanised or blue powder coated finish. Impellers are fully welded. Backward-curved laminar impeller. Motors Type - standard TEFC squirrel cage induction motors Electricity supply - three-phase to suit a wide range of voltages and frequencies. Internal Thermal Protection Thermistors can be provided. Testing Air flow tests based on ISO5801: 2007 Noise tests based on ISO13347: Part 3, 2004 Wiring Diagram See page N-6, diagrams DD 1,2, 3. SUGGESTED SPECIFICATION The single width, single inlet (SWSI) centrifugal fans shall be of the Blue Rhino series as designed and manufactured by Fantech Pty. Ltd. and be of the model numbers shown on the schedule/drawing. The housings and impellers shall be made from fully welded mild steel with hot dip galvanised or blue powder coated finish. Impellers shall be backward-curved laminar design, rotating clockwise unless specified otherwise. They shall be driven by a direct drive motor and designed to operate with a Variable Speed Drive. They shall be fitted with inlet spigot and discharge flange, and come standard with inspection hatches and drain plugs. Air flow test data shall be based on ISO5801:2007. Noise test data shall be based on ISO13347: Part 3, 2004. Blue Rhino P - Pedestal type I Impeller size in inches Impeller size in mm - S - Single width, single inlet (SWSI)- C - Clockwise impeller rotation A - Anti-clockwise impeller rotation Please provide the following additional information so your order can be processed promptly: • Direction of rotation: clockwise or anti-clockwise • Finish required: hot dip galvanised or powder coated • Discharge angle (Pedestal range only): 0 degree, 90 degree or 180 degree CENTRIFUGAL FANS; SWSI © FANTECH 2020

BLUE RHINO CENTRIFUGAL FANS: SWSI BRB Series Dia 12-14. 24, 48 r/s CENTRIFUGAL FANS; SWSI

qrv- Volume Flow, m3/s dB(A) @ 3m: Outlet noise = O DIMENSIONS App. Model Weight Motor speed increased to 60Hz using VSD E-15C CENTRIFUGAL FANS; SWSI © FANTECH 2020

BLUE RHINO CENTRIFUGAL FANS: SWSI HOW TO ORDER Direction of Rotation & Discharge Position Model Dimensions, mm Number ABODE CENTRIFUGAL FANS; SWSI E-15D