FANGXING SLATE&SHAKE-201303
12Pages

INTERLOCK SLATE Unlike traditional slate roof tiles, the Fangxing Slate system incorporates natural stone grains combined with polymer resin manufactured under high heat and pressure producing a durable engineered stone composite material. The Fangxing Slate profile is a wide format interlocking roof tile. Fangxing Slate offers a thin stream lined sleek look that can accommodated contemporary or traditional architectural styles. 01 Shandong Fangxing Building Materials Co., Ltd,

Product Data Size of main tile: 360x340mm Minimum roof pitch: 17° Quantity per square meter: 11.1 pes Product Certificate Shandong Fangxing Building Materials Co., Ltd. 02

03 Shandong Fangxing Building Materials Co., Ltd^ © Applicable to severe weather conditions © Interlocking laps lead to high efficiency will never slide away © Low water absorption of only 0.43% © Excellent imitation of natural slate © Compared to natural slate: high efficiency, no radiation, low breakage, clear texture Slate Black Slate Grey mother colors can be processed based on your color samples.

Available To Create Perfect Trims Shandong Fangxing Building Materials Co., Ltd, 04

Fangxing Shake is molded from natural stone grain and resin under high temperature and pressure, with natural cedar appearance. Product Data Size of main tile: 360x490mm Minimum roof pitch: 17° Quantity per square meter: 7.4pcs 05 Shandong Fangxing Building Materials Co., Ltd.

© High imitation with natural cedar shake © The interlocking design and molded water channels ensure the shakes will never leak or distort when correctly installed © Waterproofing and wind resistance © Maintenance-free. No bristletail or moss will grow on the tile © Saving the earth's natural resources © Compared to natural cedar: fire-resistance, no rot, no moisture absorption, no crack, no moth, more durable Shake Brown Shandong Fangxing Building Materials Co., Ltd 06

INSTALLATION GUIDELINE • Lay the underlay, starting at,and parallel to the eaves. Horizontal laps should be at least 150mm wide.(Figure 1) • At a verge the underlay should finish over the outer skin of brickwork or outer rafter in the case of an overhanging verge. (Figure 2) • At a monopitch ridge the underlay should extent over the top fascia or • At a duo-pitch ridge the underlay from one side should overlap the underlay on the other side by at least 150mm. (Figure 3) upper rolls lower rolls roof truss lower rolls upper rolls —j---upper rolls Shandong Fangxing Building Materials Co., Ltd....

• Battens should be made of fine quality wood. 38mm*25mm or • The battens should be soaked in antiseptic or asphaltic oil before installation. • Battens should be parallel to the eaves and ridge lines. Set the first batten at eaves and the toppest batten at the center of • 3.5 Each batten should be not less than 1500mm long. Where battens are jointed ensure the cut ends are square. Ensure that full support is provided to fix the ends of the battens at hips • Installation of main tile * Before installation, strings should be aligned accordingly. Ensure the tiles are installed parallelly and...

Installation of ridge tile Bend and fix the ridge batten straps to the ridge.(Figure 9) Use the top battens to adjust the distance to the ridge batten. Lay the tiles in normal way.Tiles should be neatly cut to assure to be close to the batten and installed properly. Lay the rolls along the center line of ridge and tack to the ridge ridge batten -ridge batten Self screw — roof beam center line of ridge — roof tmss > Install terminal ridge tile at the side abutment or the end of ridge tile. Put next ridge tile on the previous one, and then fix by nail. Install the following ridge tile in the...

Shandong Fangxing Building Materials Co., Ltd. 10

Shandong Fangxing Building Materials Co., Ltd. 668 Beiyuan Road, Laizhou, 261400, Shandong, China E-mail: inquiry@fangxing.com FANGXING FEBRUARY 2013 EDITION