BEAM Single Seat

Design, shop drawings and development by Factory Furniture Ltd Manufacture Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and dispatched ready for installation. Replacement products or components should be ordered direct from Factory Furniture Ltd. The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd. All timber used in Factory Furniture products is FSC® certified Responsible Forest Management Contents Spec Sheet BEAM Single Seat ... 3 Detailed Materials & Maintenance ... 4

BEAM Single Seat Slats - FSC® certified hardwood Frame - Mild steel Timber - Untreated sanded finish as standard Mild steel - Hot-dip galvanised (polyester powder-coated finish available (colour as per client’s specification)) Metric L 3000mm | width 510mm | height 800mm Imperial L 9’ 10” | width 1’ 8” | height 2’ 7½” Fixing centres Fixing method 2 off Resin stud anchors per base (4 anchors total) 2 no. pad 400 x 400 x 400 mm in C20 concrete (recommendation only) Please observe health & safety lifting guidelines. A forklift or crane will be required for off-loading and positioning of this product....

Detailed Material & Finish Specifications Seat Beam & Backrest • Beam and back are manufactured from FSC® certified hardwood and profiled with a sanded finish - left untreated (natural) as standard. Bases & Brackets • Elements manufactured from mild steel with an all welded construction and hot-dip galvanised finish as standard (polyester powder coated finish available (colour as per customer specification)). • Each seat has 2 no. bases and 2 no backrest brackets bolted to seat beam and backrest. • Seat anchored to ground using 2 no. M10 x 130mm resin fix stud anchors per base (4 no. total). General...

ALL INSTALLATION WORKS TO BE CARRIED OUT BY COMPETENT PERSONNEL - INSTALL AS COMPLETE 2 no. foundation pads 400x400x400 mm in C20 concrete (recommended) Beam Single Seat 1. Install suitable foundation pads (see illustrations) with top faces at ground level 2. Position seat in correct position / orientation with bases centrally on foundation pads (if necessary use shims to get seat level); then mark hole positions through bases 3. Remove seat; drill holes 012mm x 125mm deep (or as bolt manufacturer’s recommendations) 4. Clear debris from holes 5. Screw capnuts onto resin anchor studs (leaving...

NBS Specification Data PRODUCT REFERENCE – FF1054-SS – BEAM SINGLE SEAT Description Uniclass 2015 Category Design Seat with galvanised mild steel frame and timber beams Pr_40_30_29_84 Street and site benches As per drawing: FF1054 MANUFACTURER Name Address Website Telephone Factory Furniture Ltd Unit 5 Pioneer Road, Faringdon, Oxfordshire, SN7 7BU www.factoryfurniture.co.uk +44 (0)1367 242731 MATERIAL Slats Frame FSC® certified hardwood Mild steel FINISH Timber Mild steel Untreated sanded finish as standard Hot-dip galvanised (option for polyester powder coat) SIZE 3000mm x 510mm x 800mm (LxWxH)...