BEAM Double Bench

Design, shop drawings and development by Factory Furniture Ltd Manufacture Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and dispatched ready for installation. Replacement products or components should be ordered direct from Factory Furniture Ltd. The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd. All timber used in Factory Furniture products is FSC® certified Responsible Forest Management Contents Spec Sheet BEAM Double Bench ... 3 Detailed Materials & Maintenance ... 4

BEAM Double Bench Slats - FSC® certified hardwood Frame - Mild steel Timber - Untreated sanded finish as standard Mild steel - Hot-dip galvanised (polyester powder-coated finish available (colour as per client’s specification)) Metric L 3000mm | width 450mm | height 450mm Imperial L 9’ 10” | width 1’ 5½” | height 1’ 5½” Fixing centres Fixing method 2 off Resin stud anchors per base (4 anchors total) 2 no. pad 400 x 550 x 400 mm in C20 concrete (recommendation only) Please observe health & safety lifting guidelines. A forklift or crane will be required for off-loading and positioning of this product....

Detailed Material & Finish Specifications Bench Beams • 2 no. beams are manufactured from FSC® certified hardwood and is profiled with a sanded finish - left untreated (natural) as standard. Bases • Manufactured from mild steel with an all welded construction and hot-dip galvanised finish as standard (polyester powder coated finish available (colour as per customer specification)). • Each bench has a pair of beams and 2 no. bases bolted together. • Bench anchored to ground using 2 no. M10 x 130mm resin fix stud anchors per base (4 no. total). General Maintenance (Recommended Schedule & Guidelines) Daily/Weekly/Monthly...

Installation Instructions ALL INSTALLATION WORKS TO BE CARRIED OUT BY COMPETENT PERSONNEL - INSTALL AS COMPLETE UNIT 3000 2 no. foundation pads 400x550x400mm in C20 concrete (recommended) 2000 Beam Double Bench 1. Install suitable foundation pads (see illustrations) with top faces at ground level Position bench in correct position/orientation with bases centrally on foundation pads (if necessary use shims to get bench level); then mark hole positions through bases 3. Remove bench; drill holes Ø12mm x 125mm deep (or as bolt manufacturer’s recommendations) 4. Clear debris from holes 5. Screw capnuts...

NBS Specification Data PRODUCT REFERENCE – FF1054-DB – BEAM DOUBLE BENCH Description Uniclass 2015 Category Design Bench with galvanised mild steel frame and timber beam Pr_40_30_29_84 Street and site benches As per drawing: FF1054 MANUFACTURER Name Address Website Telephone Factory Furniture Ltd Unit 5 Pioneer Road, Faringdon, Oxfordshire, SN7 7BU www.factoryfurniture.co.uk +44 (0)1367 242731 MATERIAL Slats Frame FSC® certified hardwood Mild steel FINISH Timber Mild steel Untreated sanded finish as standard Hot-dip galvanised (option for polyester powder coat) SIZE 3000mm x 450mm x 450mm (LxWxH)...