FACTORY FURNITURE ARRY Picnic Table (Single & Double) factoryfumiture.co.uk

Design, shop drawings and development by Factory Furniture Ltd Manufacture Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and dispatched ready for installation. Replacement products or components should be ordered direct from Factory Furniture Ltd. The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd. All timber used in Factory Furniture products is FSC® certified Responsible Forest Management Contents Spec Sheet ARRY Single Picnic Table ... 3 ARRY Double Picnic Table ... 4 Detailed Materials...

ARRY Single Picnic Table Slats - FSC® certified softwood Frame - Mild steel Timber - Tanalised sanded finish as standard Mild steel - Hot-dip galvanised (polyester powder-coated finish available (colour as per client’s specification)) Metric L 2400mm | width 1410mm | height 750mm Imperial L 7’ 10½” | width 4’ 7½” | height 2’ 5½” Fixing centres & method 4 no. pads 400 x 400 x 400 mm in C20 concrete (recommendation only) Please observe health & safety lifting guidelines. A forklift or crane will be required for off-loading and positioning of this product. Depends on usage and position. All elements...

ARRY Double Picnic Table Slats - FSC® certified softwood Frame - Mild steel Timber - Tanalised sanded finish as standard Mild steel - Hot-dip galvanised (polyester powder-coated finish available (colour as per client’s specification)) Metric L 3605mm | width 1410mm | height 750mm Imperial L 11’ 10” | width 4’ 7½” | height 2’ 5½” Fixing centres & method 6 no. pads 400 x 400 x 400 mm in C20 concrete (recommendation only) Please observe health & safety lifting guidelines. A forklift or crane will be required for off-loading and positioning of this product. Depends on usage and position. All elements...

Detailed Material & Finish Specifications Table and Seat Slats • Slats are manufactured from FSC® certified softwood and are profiled with a sanded finish - tanalised as standard. • Slats are bolted to frame sections with 4 no. fixing points per slat. Frame Sections • Manufactured from mild steel with an all welded construction and hot-dip galvanised finish as standard (polyester powder coated finish available (colour as per customer specification)). • Table anchored to ground using M10 resin anchor studs (Single - 4 no. total; Double 6 no. total) General Maintenance (Recommended Schedule & Guidelines)...

ALL INSTALLATION WORKS TO BE CARRIED OUT BY COMPETENT PERSONNEL - INSTALL AS COMPLETE UNIT 4 no. C20 concrete 400 x 400 x 400 mm foundation pads (recommendation only) Arry Single Picnic Table 1. Install suitable foundation pads (see illustrations) with top faces at ground level. 2. Position table in correct position / orientation with bases centrally on foundation pads (if necessary use shims to get table level); then mark hole positions through leg fixing tabs. 3. Remove table; drill holes 012mm x 125mm deep (or as bolt manufacturer’s recommendations) 4. Clear debris from holes 5. Screw capnuts...

Installation Instructions ALL INSTALLATION WORKS TO BE CARRIED OUT BY COMPETENT PERSONNEL - INSTALL AS COMPLETE UNIT 6 no. 400 x 400 x 400mm C20 concrete foundation pads (recommendation only) Arry Double Picnic Table Position table in correct position / orientation with bases centrally on foundation pads (if necessary use shims to get table level); then mark hole positions through leg fixing tabs. 3. Remove table; drill holes Ø12mm x 125mm deep (or as bolt manufacturer’s recommendations) M10 x 130mm resin anchor fixed into Ø12mm hole FFL 4. Clear debris from holes 5. Screw capnuts onto resin anchor...

Description Picnic table with timber slats and mild steel frame Uniclass 2015 Category Pr_40_30_30_17 Combined outdoor tables and seating Unit 5 Pioneer Road, Faringdon, Oxfordshire, SN7 7BU www.factoryfu rnitu re.co.u k +44 (0)1367 242731 Slats FSC® certified softwood Frame Mild steel Timber Mild steel Tanalised sanded finish as standard Hot-dip galvanised (option for polyester powder coat) FF2014-S (Single) 4 no. M10 resin anchor studs FF2014-D (Double) 6 no. M10 resin anchor studs factoryfurniture.co.uk