Technical Specifications and Key Parameters

The document provides technical details for proximity readers and associated tags, specifically the TAG-10 model and devices named VIPER 400 and COBRA 600. The reading distance for the TAG-10 proximity reader is specified as a maximum of 10 cm.

Wiring and Connection Details

Both VIPER 400 and COBRA 600 devices require shielded cables with 5 conductors of 0.5 mm² cross-section. The maximum cable length allowed is 100 meters. The wiring includes connections labeled D, C, B+, and - for the TAG-10, and additional signals such as IN-A, IN-B, POWER, ALARM, and BUZZER for VIPER 400. COBRA 600 includes SPI interface signals (MISO, MOSI, SCK, SS) and power lines (GND, +).

Signal and Indicator Functions

The BUZZER function is controlled via the red cable, with states indicated as BUZZER = ON or BUZZER = OFF. The document highlights the importance of correct cable identification for proper operation.

Manufacturer and Contact Information

The devices are manufactured by FAAC S.p.A., located in Zola Predosa, Italy. Contact details include telephone and fax numbers.

Summary of Critical Requirements and Best Practices

• Use shielded cables of 5 x 0.5 mm² for connections.
• Maintain cable lengths up to 100 meters maximum to ensure signal integrity.
• Ensure correct wiring of power, data, and control lines as per device specifications.
• Observe the maximum reading distance of 10 cm for the TAG-10 proximity reader.
• Properly identify and connect the red cable for buzzer control.