– „VaPor-i“ Separate Wall-steamer – Type W 10 / W 20 real enamel Wall-steamer – Optimal for additional and special use or retrofitting. Combination unit with different models of Saunaheaters for a humidity sauna-bath. Easy installation via integrated wall mounted brackets on the cabin wall, inside the protection grid of the sauna heater or optionally by special holders on the Saunaheater. Optional equipment: Hook-in angle for mounting on the Saunaheater Inlay with a fine-sieve, made of stainless steell (for dry herbs)  only possible for Type W 20 Automic water-refill for „Vaporizer-systems“ over a external refill-box by a mechanic water-valve (Measures: circa 170/240 x 100 x 170 mm – WxDxH) The small dimensions allow a flexible cabin design. Casing in Chromium-steel, shiny or „real Enamel“ – anthracite-colored. Incl. Aroma-tray with a aroma-mug (for flavour liquits) mad

Technical Datas: Casing: Head plate: Steam-box: Heating element: Bottom/connection plate: Safety distance: Vaporizer-power/ Power connection: Dimensions (WxDxH): Steam-box filling: Steam output: Weight net: In Chromium-steel (shiny - covered with a protection-foil) or optionally „real Enamel“ - anthracite-colored (scratch-resistant, temperature-resistant, odorless). Stainless steel, brushed Chrome-nickel-steel (CNS), with a drain-valve 3/8" 1500 watts, made of a special stainless steel alloy with a overheat-protection-sensor against dry operation and warning buzzer galvanized steel sheet minimum...