1. Catalogs
  2. EWALD LANG
  3. SAUNAHEATER - SMALL STAND MODEL TYPE SE 33 AND S 33

SAUNAHEATER - SMALL STAND MODEL TYPE SE 33 AND S 33

SAUNAHEATER - SMALL STAND MODEL TYPE SE 33 AND S 33

Product catalog summary
Overview: The document describes the "S-therm" sauna heater, specifically the small stand models SE 33 and S 33, designed for family saunas. These heaters are compact, requiring only 0.14 square meters of floor space, and offer a heating capacity of up to 9 kW.
Design and Construction: The sauna heaters feature a classic design with a double-casing construction that ensures efficient heat dissipation and convection, promoting a dry and pleasant sauna climate. The low-noise operation is a key feature.
Technical Specifications:
  • Outer casing: SE 33 is made of shiny chromium-steel, while S 33 is made of anthracite-colored "real Enamel".
  • Top-plate: Brushed stainless steel.
  • Stone-basket: Made of chrome-steel, designed to avoid contact with heating elements.
  • Heating elements: Each element has a power of 1000 watts, with a low surface load of 3.2 watts/cm², ensuring a long service life.
  • Heating capacities range from 4 to 9 kW.
  • Power connection: 400V 3N AC.
  • Dimensions: 33 x 44 x 70 cm.
  • Safety distance: Minimum 7 cm around flammable parts.
  • Stone filling: Approximately 10 kg, or 18 kg with optional Stone-collar "SK".
  • Heater weight: Approximately 18 kg.
Optional Equipment: The Stone-collar "SK" is available as an optional accessory, allowing for additional sauna stones (approximately 18 kg).
Recommended Room Size: The sauna cabin size recommendations vary based on the heater's power, ranging from 4-5 m³ for 4 kW to 9-12 m³ for 9 kW, following the RAL-Guideline for sauna cabins in buildings.
Additional Information: The product is made in Germany and has an IPX4 rating, indicating protection against water splashes.
See more

Catalog excerpts

SAUNAHEATER - SMALL STAND MODEL TYPE SE 33 AND S 33-1

SAUNAHEATER „S-therm“ - SMALL STAND MODEL TYPE SE 33 AND S 33 A compact standing oven for the family sauna. Saunaheater in a classic design with proven functionally Heating power per heating element only 1000 watts, there- safe interior construction with a small footprint. fore low surface load (3,2 watts/cm2) and long service life. Only about 0,14 square meters floor area required at 9 kW heating capacity. The double-casing construction ensures direct heat dissipation and convection with optimal air exchange. This results in a dry and pleasant sauna climate by a low-noise operation. Optional equipment: Stone-collar „SK" from stainless steel Attachment for more sauna-stones. (approx. 18 kg) Technical Datas: Outer casing: Top-plate: Stone-basket: Rear/Backside: Foot-frame: Electric connection: Heating elements: Heating capacities: Power connection: Dimensions (WxDxH): Safety distance: Stone filling: Heater weight net: SE 33: Chromium-steel (shiny) - all 4 sides S 33: „real Enamel“ - anthracite-colored (scratch-resistant, temperature-resistant, odorless) Stainless steel, brushed Chrome-steel, without contact to the heating-elements SE 33: Chromium-steel (shiny) S 33: galvanized - optional in outer casing version „real Enamel“ - anthracite-colored Chrome-steel with drip protection integrated, by 2 screws fixed rear panel a 1000 watts, very low heating rod load (3,2 watts/cm2) and long life term. 4 I 5 I 6 I 7 I 8 and 9 kW 400V 3N AC 33 x 44 x 70 cm minimum 7 cm around flammable parts approx. 10 kg / with Stone-collar „SK": approx. 18 kg approx. 18 kg Recommended room size of the sauna cabin according to the table. (Basic = RAL-Guideline for sauna cabins in buildings)

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.