Types of jumping beds
3Pages

Nylon band width at jumping beds When talking about 4x4 beds, 4 mm means the width of the strands, both in the long and in the wide direction. Jumping beds at a glance This jumping bed is made of 4 mm and 4 mm wide woven nylon bands sewn lengthwise and crosswise respectively. It offers the maximum permissible jumping performance according to FIG rules and is used in almost all trampoline competitions worldwide. Used for only Premium and Ultimate frame This jumping bed is made of 4 mm and 5 mm wide woven nylon bands sewn in lengthwise and crosswise respectively. Because of the minimal air resistance caused by bouncing, it offers the high performance required for competitions. Used for only Premium and Ultimate frame

Jumping beds at a glance This jumping bed is made of 4 mm and 6 mm wide woven nylon bands sewn in lengthwise and crosswise respectively. Because of the minimal air resistance caused by bouncing, it offers the high performance required for competitions. Used for only Premium and Grand Master Exclusiv frame The bed is the predecessor of the 6x4 mm and has 6 mm wide woven nylon bands both lengthwise and crosswise. Because of the width of the bands, it can be produced at a lower cost. The 6 mm bed has a lower level of performance than the 6x4 mm model but can be also used in competitions,...

Jumping beds at a glance Contrary to the bed types with nylon bands and based on an uncomplicated production process, the school version is the most favourably priced variety of bed offering high performance and a very harmonic and balanced spring behaviour. The only disadvantage: if it is damaged, the bed can only be repaired to a limited degree. Wire reinforced belt fabric PVC-coated fabric Double perlon Used for Grand Master Exclusiv frame, Grand Master series, Master series A standard bed used for Minitramps. Very robust with average throwth performance. Especially for outdoor use made...