Catalogs >
EUROSTER >
Q1TXRX

Q1TXRX
2Pages

Catalog excerpts

eQItxrx Wireless, daily room thermostat for all types of heating and air-conditioning devices. ■ does not require leading cable connections between the thermostat and the controlled device ■ user friendly thermostat enabling easy control of temperature in living and utility rooms ■ used to control the operation of a pump, CH boiler or other heating device ■ innovative function of automatic storing of two daily settings ■ 0.2°C accuracy of the temperature setting ■ heating device operation indication, discharged batteries indication ■ function for switching the thermostat off after the heating season ■ temperature readings correction ■ test mode enabling to check the thermostat operation ■ surface mounting heating / air conditioning systems thermostat - 3 V (2 pieces of alkaline AA batteries) / receiver - 230 V 50 Hz 1 W relay, voltage-free type, SPDT 5 A 230 V 50 Hz up to 30 m [in built-up area) -9.9°C...+99°C +5°C...+45°C 0,2°C 0,1°C 0,2/0,5/1/2/5°C thermostat - LCD / receiver - LEDs +5°C...+45°C 0°C...+50°C IP20, class II white thermostat - stand / receiver - 230 V 50 Hz socket thermostat without batteries - 98.6 g / receiver - 288 g conformity to R&TTE and RoHS Directive 2 years thermostat - 82/82/35.6/receiver - 64/112/68 Euroster Q1 thermostat with stand, RX receiver, user manual, batteries Controlled device Supply voltage Maximum power consumption of the receiver Receiver output Maximum load Maximum range Temperature measurement range Temperature adjustment range Temperature adjustment accuracy Temperature reading accuracy Hysteresis range Visual signalization Operation temperature Storage temperature Ingress protection rating Color Mounting method Weight Standards, approvals, certificates Warranty period Dimensions (width / height / depth] mm Thermostat kit P.H.P.U. AS, Chumietki 4, 63-840 Krobia, Poland / euroster@euroster.com.

Open the catalog to page 1

The following diagrams are simplified and do not cover all the elements necessary for the correct installation. 1. Electrical connection block 2. Output cable, using COM - NO contact [normally open] 3. Antenna 4. EurosterRX (receiver] 5. EurosterTX placed in any room THERMOSTAT 1. Electrical connection block 2. Output cable using COM - NO contact (normally open) 3. Antenna 4. EurosterRX (receiver] 5. EurosterTX placed in any room IN ARRANGEMENT WITH A CENTRAL HEATING PUMP 1. CH boiler 2. CH pump 3. Heat consumer-radiator 4. Electrical connection block 5. Antenna 6. Eu roster RX [receiver]...

Open the catalog to page 2

Q1TXRX 2Pages

Catalog excerpts

All EUROSTER catalogs and technical brochures

Q1TXRX
2Pages