To control a central heating system mixing valve actuator and circulation ■ CH supplyor return watertemperature preset ■ heat source temperature control ■ temperature alarm threshold in the system controlled (floor heating] ■ cooperation with a room thermostat ■ transformer to increase safety ■ dial to conveniently preset the temperature ■ pump/valve operation testing function ■ corrected temperature readings ■ Anty Stop function preventing idle pump rotor and valve seizing Device controlled Power supply Rated output load Rated power consumption Temperature measurement range Temperature control range Temperature control accuracy Temperature control hysteresis Status visualization Operating temperature range Storage temperature range Mount method Weight (controller with cables) Warranty period Wyposazenie sterownika mixing valve actuator, CH pump +20°C...+70°C or+10°C...+70°C (CH temperature control mode) IP 40, class II protection against electric shocks wall-mounted, wall plugs complies with the EMC and LVD Directives Euroster 11M controller, wall plugs, instructions, mounting template, sensor bands

Cable Length: 3. Mixing valve actuator - 1,5 m 4. Controlled system temperature sensor -3m 5. Heat source temperature sensor -3m The simplified diagrams presented do not contain all of the elements necessary to correctly install the device. Do not immerse temperature sensors in liquids or install any in a chimney flue gas exit. RETURN WATER TEMPERATURE CONTROL 3. Mixing valve with actuator 5. Return water temperature sensor 6. Heat source temperature sensor FLOOR HEATING SYSTEM TEMPERATURE CONTROL 5. Mixing valve with actuator 6. Heat source temperature sensor 8. Room thermostat (option]