Scope: The document outlines the specifications for a self-supporting metal sheet used for external wall cladding, which can be installed horizontally or vertically. The material is metallic coated steel, with optional organic coatings.

Material Specifications: The steel sheets are available in thicknesses of 0.70, 0.75, 1.00, and 1.20 mm. The weight per square meter ranges from 7.55 kg to 12.94 kg, depending on thickness. Dimensional tolerances are specified according to EN 10143, and the steel conforms to EN 10346 standards. Organic coatings adhere to EN 10169.

Geometrical Characteristics: The profile depth is 89 mm with a tolerance of ±1.5 mm. The pitch is 455 mm with a tolerance of ±3.0 mm. The cover width is 455 mm with a maximum deviation of 15.0 mm. The deviation from straightness is limited to 2.0 mm/m, and squareness deviation is ≤0.5% of the width.

Fire Reaction: The material is classified as Class A1 or Class C-s3,d0 for fire reaction, depending on the coating, according to commission decision 2010/737/UE.

Load Tables: The document provides load tables for both positive and negative loads, with deflection limitations set at L/200. The tables specify load capacities for different thicknesses and spans, with a maximum span length of 3.00 m due to manufacturing constraints.

Additional Information: For further clarification, contact the Technical Department at [email protected]. EUROPERFIL, S.A. reserves the right to modify the document without prior notice.