Scope
This document outlines the specifications for a self-supporting metal sheet used for external walls, which can be installed either horizontally or vertically. The sheets are made from metallic coated steel, with optional organic coatings.

Material Specifications
The steel sheets are available in various thicknesses: 0.70 mm, 0.75 mm, 1.00 mm, and 1.20 mm. The weight per square meter and other mechanical properties such as Ig and W1/W2 are specified according to EN standards.

Geometrical Characteristics
The profile depth is 83 mm with a tolerance of ±1.5 mm. The pitch is 455 mm with a tolerance of ±3.0 mm. The cover width is also 455 mm, with a maximum deviation of 15.0 mm. Other tolerances include deviation from straightness and squareness.

Fire Reaction
The sheets have a fire reaction classification of Class A1 or Class C-s3,d0, depending on the coating.

Load Tables
The document provides load tables for both positive and negative loads, with deflection limitations set at L/200. The tables specify the load capacities for different sheet thicknesses and spans.

Additional Information
The maximum span length is limited to 3.00 m due to manufacturing constraints. For further details, contact the Technical Department at [email protected].

Note
EUROPERFIL, S.A. reserves the right to modify this document without prior notice.