*myarchiexpo

Catalogs
EUROPERFIL, SA
EUROCOVER 40N CS

EUROCOVER 40N CS

Product catalog summary

Scope: The EUROCOVER 40N CS is a self-supporting roofing product designed for discontinuous laying. It is made from metallic coated steel sheets, with optional organic coatings, used as a roofing profile.

Material Specifications: The steel thickness options range from 0.60 mm to 1.20 mm. The weight per square meter varies from 6.03 kg/m² to 11.49 kg/m² depending on the thickness. The steel conforms to EN 10346 standards, and the organic coating follows EN 10169 standards.

Geometrical Characteristics: The profile depth is 40 mm with a tolerance of ±1.0 mm. The pitch is 341 mm with a tolerance of ±2.0 mm. The cover width is 1,025 mm with a tolerance of ±5.0 mm. The product complies with EN 14782:2006 for dimensional tolerances.

Fire Reaction: The product has a fire reaction classification of Class A1 or Class C-s3,d0, depending on the coating.

Permissible Span for Positive Loads: The permissible span for positive loads is determined by the thickness of the steel and the load applied, with deflection limitations set at L/200.

Permissible Span for Negative Loads: The permissible span for negative loads varies based on the fastening method (to crown or valley) and the thickness of the steel support. The partial safety factor of the fastening is 1.15.

Contact Information: For further clarification, contact the Technical Department at [email protected] or by phone.

Note: EUROPERFIL, S.A. reserves the right to change this document without notice.

Catalog excerpts

Roofing profile (3.341.40) EUROCOVER 40N CS SCOPE Self-supporting roofing product for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings used as roofing profile. GEOMETRICAL CHARACTERISTICS SECTION DETAIL OVERLAP DETAIL PERMISSIBLE SPAN (m) FOR POSITIVE LOADS - Limitation of deflection: L/200 Creation date: 16/12/2013 • Revision date: 08/05/2014 Avda. de la Granvfa, 179 • 08908 L'Hospitalet de Llobregat • BARCELONA • SPAIN Avda. Vall d'Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • LLEIDA • SPAIN [email protected] www.europerfil.es

Open the catalog to page 1

PERMISSIBLE SPAN (m) FOR NEGATIVE LOADS (fastening to crown) For any further clarification, you can contact Technical Department ([email protected] or by phone). EUROPERFIL, S.A. reserves the right to change this document without notice. Creation date: 16/12/2013 • Revision date: 08/05/2014 Avda. de la Granvfa, 179 • 08908 L'Hospitalet de Llobregat • BARCELONA • SPAIN Avda. Vall d'Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • LLEIDA • SPAIN [email protected] www.europerfil.es

Open the catalog to page 2

All EUROPERFIL, SA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list