*myarchiexpo

Catalogs
EUROPERFIL, SA
EUROBASE 67 CS

EUROBASE 67 CS

Product catalog summary

Scope
This document outlines the specifications for the EUROBASE 67 CS, a self-supporting roofing product designed for discontinuous laying. It is made from metallic coated steel sheets, with optional organic coatings, used as a roofing profile.

Material Specifications
The steel used in the roofing profile comes in various thicknesses ranging from 0.60 mm to 1.20 mm. The weight per square meter and other mechanical properties such as moment of inertia (Ig) and section modulus (W1, W2) are specified for each thickness. The steel conforms to EN 10346 standards, and the organic coating follows EN 10169 standards.

Geometrical Characteristics
The profile has a depth of 67 mm with a tolerance of ±1.5 mm. Other dimensions such as the depth of stiffeners, pitch, and widths of crown and valley are provided with specific tolerances. The cover width is 810 mm with a maximum deviation of 15 mm. The product complies with EN 14782:2006 for dimensional tolerances.

Fire Reaction
The roofing profile has a fire reaction classification of Class A1 or Class C-s3,d0, depending on the coating, as per commission decision 2010/737/UE.

Permissible Span for Loads
The document provides detailed tables for permissible spans under both positive and negative loads, with limitations on deflection (L/200). The spans vary based on the thickness of the steel and the load applied, with specific values provided for different load scenarios.

Additional Information
The document notes that the partial safety factor for fastening is 2.00. For further clarification, contact details for the Technical Department are provided. EUROPERFIL, S.A. reserves the right to modify the document without prior notice.

Catalog excerpts

Self-supporting roofing product for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings used as roofing profile. Avda. Vall d'Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • LLEIDA • SPAIN

Open the catalog to page 1

PERMISSIBLE SPAN (m) FOR NEGATIVE LOADS (fastening to valley) The partial safety factor of the fastening is 2,00. For any further clarification, you can contact Technical Department ([email protected] or by phone). EUROPERFIL, S.A. reserves the right to change this document without notice Avda. Vall d'Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • LLEIDA • SPAIN

Open the catalog to page 2

All EUROPERFIL, SA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list