*myarchiexpo

Catalogs
EUROPERFIL, SA
EUROBASE 48 CS

EUROBASE 48 CS

Product catalog summary

Scope
This document outlines the specifications for the EUROBASE 48 CS, a self-supporting roofing product designed for discontinuous laying. It is made from metallic coated steel sheets, with optional organic coatings, used as a roofing profile.

Material Specifications
The steel used in the roofing profile comes in various thicknesses ranging from 0.60 mm to 1.20 mm. The weight per square meter varies accordingly, from 5.89 kg/m² to 11.78 kg/m². The document references standards EN 10143 for dimensional tolerance, EN 10346 for steel, and EN 10169 for organic coating.

Geometrical Characteristics
The profile has a depth of 48 mm with a tolerance of ±1.0 mm, and stiffeners with a depth of 4 mm. The pitch is 250 mm with a tolerance of ±2.0 mm. The cover width is 1,000 mm with a tolerance of ±5.0 mm. The document specifies tolerances for deviations from straightness and squareness, as well as overlap details.

Fire Reaction
The roofing profile has a reaction to fire classification of Class A1 or Class C-s3,d0, depending on the coating, as per commission decision 2010/737/UE.

Permissible Span for Loads
The document provides tables for permissible spans under positive and negative loads, with limitations on deflection (L/200). The permissible spans vary based on the thickness of the steel and the load applied, with specific values provided for different load scenarios.

Additional Information
The document notes that the partial safety factor of the fastening is 2.00. For further clarification, contact details for the Technical Department are provided. EUROPERFIL, S.A. reserves the right to change the document without notice.

Catalog excerpts

Avda. Vall d'Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • LLEIDA • SPAIN

Open the catalog to page 1

PERMISSIBLE SPAN (m) FOR NEGATIVE LOADS (fastening to valley) The partial safety factor of the fastening is 2,00. For any further clarification, you can contact Technical Department ([email protected] or by phone). EUROPERFIL, S.A. reserves the right to change this document without notice. Avda. Vall d'Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • LLEIDA • SPAIN

Open the catalog to page 2

All EUROPERFIL, SA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list