*myarchiexpo

Catalogs
EUROPERFIL, SA
EUROBASE 106 CS

EUROBASE 106 CS

Product catalog summary

Scope: The document describes a self-supporting roofing product, EUROBASE 106 CS, designed for discontinuous laying. It is made from metallic coated steel sheets, with optional organic coatings, used as a roofing profile.

Material Specifications: The steel used comes in various thicknesses ranging from 0.60 mm to 1.20 mm. The weight per square meter and other mechanical properties such as moment of inertia (Ig) and section modulus (W1, W2) are specified for each thickness.

Geometrical Characteristics: Key dimensions include a profile depth of 106 mm, stiffener depth of 5 mm, and a pitch of 250 mm. Tolerances for these dimensions are provided, ensuring precision in manufacturing.

Fire Reaction: The product is classified as Class A1 or Class C-s3,d0 for fire reaction, depending on the coating, according to the commission decision 2010/737/UE.

Permissible Span for Loads: The document provides detailed tables for permissible spans under both positive and negative loads, with deflection limitations specified as L/200. The spans vary based on the thickness of the steel and the load applied.

Additional Information: The document notes that the maximum length of the roofing profile is 14,000 mm, and the minimum is 1,200 mm. It also mentions a partial safety factor of 2.00 for fastenings.

Contact Information: For further clarification, contact details for the technical department are provided.

Disclaimer: EUROPERFIL, S.A. reserves the right to change the document without notice.

Catalog excerpts

SCOPE Self-supporting roofing product for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings used as roofing profile. MATERIAL (Steel) Revision date: 20/05/2014 Avda. de la Granvia, 179 • 08908 L'Hospitalet de Llobregat • BARCELONA • SPAIN Avda. Vall d'Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • LLEIDA • SPAIN [email protected] www.europerfil.com

Open the catalog to page 1

PERMISSIBLE SPAN (m) FOR NEGATIVE LOADS (fastening to valley) The partial safety factor of the fastening is 2,00. For any further clarification, you can contact Technical Department ([email protected] or by phone). EUROPERFIL, S.A. reserves the right to change this document without notice. Revision date: 20/05/2014 Avda. de la Granvia, 179 • 08908 L'Hospitalet de Llobregat • BARCELONA • SPAIN Avda. Vall d'Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • LLEIDA • SPAIN [email protected] www.europerfil.com

Open the catalog to page 2

All EUROPERFIL, SA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list