1. Catalogs
  2. EUROPERFIL, SA
  3. ENTROPÍA V1 FA

ENTROPÍA V1 FA

ENTROPÍA V1 FA

Product catalog summary
Architectural Facade Profile Overview
This document provides technical specifications for an architectural facade profile, focusing on the finished product made from raw materials. It includes load tables, dimensional tolerances, and reaction to fire standards.

Specifications
- Maximum span per section: 3 meters, limited by a maximum manufacturing length of 6 meters.
- Dimensional tolerances comply with EN 508 1.
- Reaction to fire classification: A1 (Plastisol PVC C-s3,d0).
- Maximum length: 6000 mm; Minimum length: 100 mm.
- Material: Self-supporting metal sheet for external walls, made from metallic coated steel sheet, with or without additional organic coatings.

Load Tables
The document includes detailed load tables indicating positive and negative loads (pressure and suction) for various thicknesses and spans. These are measured in daN/m2 with a yield strength (Rp0,2) of 320 Mpa and a deflection limit of L/200.

Material Characteristics
- Thickness options range from 0.60 mm to 1.20 mm.
- Weight varies from 7.696 kg/m2 to 10.261 kg/m2 depending on thickness.
- The product is suitable for both horizontal and vertical installation.

Contact Information
For further clarification, contact the Technical Department at [email protected] or by phone. EUROPERFIL, S.A. reserves the right to change the document without notice.

Company Information
- Headquarters: Avda. de la Granvía, 179, 08908 L’Hospitalet de Llobregat, Barcelona, Spain.
- Factory: Avda. Vall d’Aran, s/n, Pol. Ind. de Cervera, 25200 Cervera, Lleida, Spain.

Standards and Certifications
- Coil coated steel complies with EN 10169.
- Tolerances adhere to EN 10143.
- Side lap system follows EN 14782:2006.
See more

Catalog excerpts

ENTROPÍA V1 FA-1

Perfil de fachada arquitectonica /Architectural facade profile /Profil architectural de fagade EUROPERFIL LA PIEL DE LOS EDIFICIOS Chapa metalica de acero autoportante destinada como revestimiento exterior de fachada simple o sandwich (posicion horizontal/vertical). Self-supporting metal sheet for external walls (horizontally/vertically laid) made from metallic coated steel sheet with or without additional organic coatings. Plaque metallique autoportante d’acier destinee pour la realisation de bardages a simple peau ou de la peau exterieure de bardages a double peau (pose horizontale/verticale). Producto acabado / Finished product / Produit fini Materia prima / Raw material / Matiere premiere La luz maxima por vano de 3 m, esta condicionada por la longitud maxima de fabrication de 6 m. The maximum spam of 3 m, is conditioned by the maximum manufacturing length of 6 m. La portee maximale par travee de 3 m, est conditionnee par la longueur maximal de fabrication de 6 m. Para cualquier aclaracion sobre el presente documento puede contactar con el Departamento Tecnico ([email protected] o via telefonica). EUROPERFIL, S.A. se reserva, en cualquier caso, los derechos de cambio del presente documento sin previo aviso. For any further clarification, you can contact Technical Department ([email protected] or by phone). EUROPERFIL, S.A. reserves the right to change this document without notice. Pour toute information complementaire concernant ce document, n’hesitez pas a contacter le Departement Technique ([email protected] ou par telephone). EUROPERFIL, S.A. se reserve toutefois le droit de modifier ce document, sans preavis. Oficinas centrales / Headquarters / Siege: Avda. de la Granvia, 179 • 08908 L’Hospitalet de Llobregat • Barcelona • Espana • ': +34 93 261 63 33 Fabrica / Factory / Usine: Avda. Vall d’Aran, s/n • Pol. Ind. de Cervera • 25200 Cervera • Lleida • Espana

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.