- Catalogs
- Europa Profil Aluminium SA
- A40 Hybrid
A40 Hybrid
A40 Hybrid
The EUROPA Hybrid A40 SI is a high-performance thermal break opening system designed for superior thermal insulation and modern architectural requirements. It features a straight-line design and is part of the 40 years Anniversary Series.
The system offers increased thermal insulation with a Uf value starting from 1.1 W/m2K and enhanced sound insulation. It uses specially designed EPDM gaskets and insulating materials like XPS and EPS for optimal performance. The system includes a multilocking mechanism for enhanced security.
The EUROPA Hybrid A40 HS is the Hidden Sash version, designed to conceal outer joints for a uniform appearance. It supports various construction types, including entrance doors and fixed glazing.
- Aluminium Alloy: AIMgSi-0.5 F22
- Hardness: 12 Webster
- Minimum Coating Thickness: 75μm
- Profile Thickness: 1.4-2mm
- Maximum Sash Dimensions: 1.0m x 2.3m
- Maximum Sash Weight: 140kg
The system is certified by QUALICOAT for powder coating, IFT Rosenheim for air permeability, water tightness, and wind load resistance, and DTI for thermal conductivity.
The system achieves Class 4 air permeability, Class 9A water tightness, and Class C5/B5 wind load resistance. It supports double or triple glazing up to 44mm for enhanced insulation.
The catalogue includes detailed sections and machining instructions, emphasizing water drainage and the use of EPDM plugs for sealing.
The EUROPA Hybrid A40 SI system is a robust solution for modern architectural needs, offering high thermal and sound insulation, security, and aesthetic uniformity.
- Water Drainage for Sash and Frame: Drill two holes in each sash, one on the left and one on the right, 100mm from the edges. Ensure a 50mm distance between holes A and B.
- Sash Assembly for Adjoining Profile Cap & Central Gasket: Apply sealer on the TH-56301 profile, install the pO-56401 cap, and secure with screws. Apply sealer along the height of the adjoining profile before installation. Cut edges of the central gasket GA-56401 before installation for optimal water insulation.
- Hidden Sash Assembly: Similar procedure as the visible sash, with specific instructions for the TH-56320 profile and the requirement to install glazing before the adjoining profile.
- Transom Assembly: Ensure proper insulation with adhesive at the joining spots between frame and sash.
- Assembly Instructions for Profile with Pin: Drill holes for pin insertion, adjust hole diameters, apply adhesive, and ensure a stable assembly for 24 hours for glue drying.
- Quality Control Methods: Tolerances for dimensions, straightness, and bending are specified. For example, a critical dimension of 50mm has a tolerance of +/- 0.40mm.
- Electrostatic Coating: Surface appearance should be checked from a distance of 2m, ensuring no visible defects.
- Various crimping corners and gaskets are specified for different profiles, with dimensions provided for each component.
- Instructions for the installation of hinges and locking mechanisms are included, with specific templates and weight capacities detailed.
Surfaces must be examined from a 2-meter distance, ensuring no defects are visible. This differs from QUALICOAT’s specification of a 3-meter distance.
The document outlines various tools and procedures for drilling and punching in aluminum systems, including tools for casement drainage, bottom rail, transom, and sash drilling.
Detailed steps for using the system’s punching machine are provided, focusing on different components like frames and sashes.
EUROPA celebrates 40 years with new architectural system series, marked by the "40 years Anniversary Series" logo. These series are part of the hybrid category, featuring modern design and high performance, enhancing EUROPA’s reputation for quality.
EUROPA PROFIL ALUMINIUM S.A. is based in Greece, with its factory and headquarters located at the 56th km of the Athens-Lamia National Road, and a showroom in Marousi, Greece.
Catalog excerpts
Τεχνικός Κατάλογος | Technical Catalogue Ανοιγόμενο Θερμομονωτικό Σύστημα
Open the catalog to page 1
ΑΝΟΙΓΟΜΕΝΟ ΘΕΡΜΟΜΟΝΩΤΙΚΟ ΣΥΣΤΗΜΑ THERMAL BREAK OPENING SYSTEM Το νέο ανοιγόμενο θερμομονωτικό σύστημα EUROPA Hybrid A40 SI αποτελεί την κορυφαία πρόταση της EUROPA όσον αφορά στα αρχιτεκτονικά συστήματα υψηλής θερμομόνωσης (Super Insulation). Ο σχεδιασμός των προφίλ εναρμονίζεται με τις σύγχρονες αρχιτεκτονικές τάσεις, καθώς προσφέρεται σε ίσιες γραμμές. Ιδιαίτερη έμφαση έχει δοθεί στον σχεδιασμό της σειράς ώστε να παρέχει αυξημένη θερμομόνωση με Uf από 1,1W/m 2K καθώς και αυξημένη ηχομόνωση. Τα ειδικά σχεδιασμένα ελαστικά διπλής διέλασης από υλικό epdm σε συνδυασμό με expanded - epdm, όπως επίσης...
Open the catalog to page 2
Περιεχόμενα Πιστοποιητικά Συστήματος | System’s Certificates Τεχνικά Χαρακτηριστικά Συστήματος | System’s Technical Characteristics Συνοπτικός Πίνακας Προφίλ | General Profiles Table Κατασκευαστικές Τομές | Sections Μηχανισμοί Περιμετρικού Κλειδώματος | Multilocking Mechanisms Πάχη Υαλοπινάκων | Glazing Thickness Μέτρα Κοπής | Cutting Instructions
Open the catalog to page 3
Πιστοποιητικά Συστήματος System’s Certificates Πίνακας συντελεστών θερμοπερατότητας κουφώματος Uw Uw coefficient table of thermal conductivity of frames Οι παρακάτω συντελεστές προέκυψαν από τους πίνακες F1 και F2 του προτύπου EN ISO 10077-2:2011 με βάση συντελεστή Ug του χρησιμοποιούμενου υαλοπίνακα, και μπορούν να χρησιμοποιηθούν στη δήλωση επιδόσεων του CE. Σε κάθε τύπο κατασκευής επιλέχθηκε ο δυσμενέστερος συντελεστής θερμοπερατότητας (Uf), σύμφωνα με τα αποτελέσματα του υπ’ αριθμ. 0108/696770 πιστοποιητικού που εξέδωσε το κοινοποιημένο εργαστήριο Danish Technological Institute (Notified...
Open the catalog to page 4All Europa Profil Aluminium SA catalogs and technical brochures
EUROPA 8003 Pages
Window Safety28 Pages
EUROPA 5500 HYBRID152 Pages
EUROPA 5000131 Pages
Europa 500112 Pages