Eurobrick Stone Finishes
1Pages

STONE FINISHES Eurobrick has a range of stone finishes for use on whole projects or to provide architectural detail such as quoins and feature bands. The Bradstone range of reconstructed stone slips and corners are suitable for use in our panel systems. The Bradstone range is available in the following colours: Natural stone slips and corners may be specially cut for projects. Please be advised that lead times for cut stone vary. Please contact us for more information. SLAIDBURN PROJECT A planning condition for a new pumping station, situated in a highly sensitive rural location, required a specific stone finish. Eurobrick sourced Waddington Sandstone and had slips and corners specially cut to fit our cladding system. The Sandstone pitched face slips were contrasted with smooth fairfaced sandstone slips for the lintel detail. Rough Dressed Cotswold Rough Dressed Iron Ham Rough Dressed Southwold Square Dressed Buff Square Dressed Pennine Traditional Buff Cotswold PLEASE NOTE: All Bradstone products are manufactured/cut to order. Lead times vary between 4-8 weeks. Please contact us for confirmation of lead times when scheduling and ordering. Other colours are available to special order. Please see our website for table of sizes. For technical queries or further advice on ordering please call For more information please visit our website at OTHER FINISHES Other stone finishes which may be fixed direct to flat substrates are available to special order. Please ask our sales team for more information. IMPORTANT: It should be noted that as the materials used in the manufacture of stone products are from natural sources, variations in shade and dimension can occur. This should not be viewed as a fault in production and should be taken into account at the design stage of the project. Installers must carefully monitor all materials used and reject any sub-standard or unsuitable materials prior to installation. Eurobrick Systems Limited will not accept any liability for any costs arising from the rejection of materials once they have been installed.